Home > Bosch > BOSCH SMS2ITW08G Dishwasher

BOSCH SMS2ITW08G Dishwasher

Cleaning filters  
Cleaning spray arms  
Clean wastewater pump  
1. After each wash check the filters for  
4. Press the locking  
1. Unscrew the upper spray arm  
and  
1. Disconnect the appliance from the power supply.  
2. Remove the filter system.  
3. Scoop out any water.  
4. Prise off the pump cover using a  
spoon and grip it by the crosspiece.  
residue.  
catches  
to-  
pull down to remove  
.
gether and lift  
2. Turn the coarse  
the coarse filter  
filter anticlock-  
out  
.
wise  
and re-  
move the filter  
system  
.
5. Clean the filter elements under running  
water.  
2. Pull up the lower spray arm to remove.  
3. Pull down the mi-  
cro filter to re-  
move.  
6. Re-assemble the filter system.  
7. Insert the filter system into the appliance  
and turn the coarse filter clockwise.  
Make sure that the arrow markings  
match up.  
5. Lift the pump cover inwards at an angle and remove.  
6. Remove any remnants of food and foreign bodies in the area  
of the impeller.  
7. Insert the pump cover  
and press  
3. Check the outlet nozzles on the spray arms for blockages un-  
der running water and remove any foreign bodies.  
4. Insert the lower spray arm.  
down  
.
a The pump cover clicks into position.  
a The spray arm clicks into position.  
5. Insert the upper spray arm and screw it firmly in place.  
8. Install the filter system.  
Troubleshooting  
Fault  
Cause and troubleshooting  
Fault  
C
a
u
s
e
a
n
d
t
r
o
u
b
l
e
s
h
o
o
t
i
n
g
Fault  
Cause and troubleshooting  
Display for water supply Supply hose is kinked.  
lights up  
Display for water supply Wastewater hose is blocked or kinked.  
Remnants of food on  
tableware.  
Washing programme selected too weak.  
lights up  
1.  
I
n
s
t
a
l
l
t
h
e
s
u
p
p
l
y
h
o
s
e
w
i
t
h
o
u
t
k
i
n
k
s
.
Reposition the wastewater hose without kinks.  
Select a more intensive washing programme.  
2.  
Remove residues.  
Water tap is turned off.  
Removable streaks are  
present on glasses, glass-  
ware with a metallic ap-  
pearance and cutlery.  
Amount of rinse aid to be dispensed is set too high.  
Turn on the water tap.  
Set the rinse aid system to a lower setting.  
Siphon connection is still sealed.  
Check the connection to the siphon and open if necessary.  
Water tap is jammed or furred up.  
No rinse aid has been added.  
Turn on the water tap.  
Add rinse aid.  
Cover of the wastewater pump is loose.  
Secure the cover of the Wastewater pump so it clicks into  
position.  
The filters in the water connection of the supply or AquaStop  
hose are blocked.  
Rust spots on cutlery.  
Cutlery is not sufficiently rust-resistant. Knife blades are often  
more severely affected.  
1.  
2.  
3.  
4.  
5.  
Switch off the appliance.  
Pull out the mains plug.  
Turn off the water tap.  
Unscrew the water connection.  
Remove the filter from the sup-  
ply hose  
Remnants of food on  
tableware.  
Tableware is placed too close together or basket is overfilled.  
Use rust-resistant tableware.  
1.  
Arrange tableware with sufficient space in between.  
The spray jets must reach the surfaces of the tableware.  
Avoid points of contact.  
Cutlery may also rust if washed together with rusting items.  
Do not wash rusting items.  
2.  
Detergent residue is  
Spray arms were blocked by tableware so detergent was not  
present in the detergent rinsed out.  
Spray arm rotation is blocked.  
Arrange tableware so that it does not obstruct spray arm ro-  
tation.  
dispenser or the tablet  
collecting tray.  
Check that the spray arms are not blocked and can rotate  
freely.  
Spray arm nozzles are blocked.  
All LEDs light up or flash Electronics have detected a fault.  
Clean the Spray arms.  
or the rinse programme  
does not continue run-  
ning.  
Press the main switch button for approx. 4 seconds.  
The appliance is reset and restarted.  
Filters are soiled.  
Clean the filters.  
6.  
Clean the filter.  
7.  
8.  
9.  
10.  
11.  
Re-insert the filter in the supply hose.  
Screw the water connection back on.  
Check the water connection for leaks.  
Restore the power supply.  
Filters are inserted incorrectly and/or not engaged.  
1.  
2.  
Insert the filters properly.  
Engage the filters.  
Switch the appliance on.  
GeneralDetails
NameBOSCH SMS2ITW08G Dishwasher
MakeBosch
LanguageEnglish
FiletypePDF (Download)
File size0.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMV4HCX48E Dishwasher
BOSCH SMV4HCX48E Dishwasher
BOSCH SPV4XMX28E Dishwasher
BOSCH SPV4XMX28E Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMS2ITW08G Dishwasher