BOSCH SMS46KI01E Dishwasher

1

2

en  

Short and handy...  

Overview of water hardness settings  

Setting water softening system  

Programs  

... everything your dishwasher needs.  

You can find an overview of the  

The programme data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the programme and additional func-  

tion selected.  

The running time will change if the  

rinse aid system is switched off or  

rinse aid needs to be added.  

Medium  

Medium  

Medium  

Hard  

Hard  

Hard  

1.5 - 1.8  

1.9 - 2.1  

2.2 - 2.9  

3.0 - 3.7  

3.8 - 5.4  

5.5 - 8.9  

H02  

H03  

H04  

H05  

H06  

H07  

1.  

Press  

.

Before using for the first time, make sure you read both the op- water hardness values that can  

2. Press and hold  

3. Turn the programme selector until  

.

erating and the installation instructions.  

be selected here.  

A table of country-specific units  

can be found in the instruction  

manual.  

the display shows H:xx.  

4. Release the button.  

5. Turn the programme selector until  

the required setting has been set.  

Hardness mmol/l  

range  

Setting  

value  

6. Press  

to save the setting.  

Soft  

Soft  

0 - 1.1  

1.2 - 1.4  

H00  

H01  

Programme  

1) Duration [h:min]  

2) Energy consump-  

tion [kWh]  

3) Water [l]  

1) 2:05 - 2:15  

2) 1,400 - 1,450  

3) 9 - 19  

/

Intensive 70°  

1) 1:35 - 2:40  

2) 0,950 - 1,550  

3) 9 - 19  

Adding special salt  

/

Auto 45-65°  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

1) 3:30  

/

2) 0,937  

Eco 50°  

3) 9,5  

1) 1:25 - 1:30  

2) 0,850 - 0,900  

3) 11 - 14  

1) 1:00  

2) 1,300  

3) 10  

/

Glass 40°  

4. Place the lid back on the dispenser and turn to  

close.  

1 hr Programme  

1) 0:15  

/

2) 0,050  

Adding rinse aid  

PreRinse  

3) 4  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

1) 1:30  

of the dispenser for rinse  

2

2) 0,990  

aid  

and lift  

.

Machine Care  

3) 9,5  

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 ml  

25 ml  

15 ml  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 3 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMS46KI01E Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.44 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMS46KI01E Dishwasher Overview

Summary of Contents

• Page 1: Short and handy overview of water hardness settings. Setting water softening system is essential for optimal performance. The programme data has been measured in the laboratory according to European standard EN 60436. Consumption figures depend on the programme and additional functions selected. The running time will change if the rinse aid system is switched off or needs to be added. Before using for the first time, read both the operating and installation instructions. To avoid damage, only add special salt to the dispenser just before the programme starts. Add rinse aid up to the max mark in the dispenser for rinse aid. Load the tableware, add detergent, and select the programme to use the appliance. Only clean tableware that is suitable for dishwashers should be used.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and scoop out any water. Clean the filter elements under running water. Re-assemble the filter system and insert it into the appliance. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages. Insert the lower spray arm and the upper spray arm firmly in place. Clean wastewater pump Lift the pump cover inwards at an angle and remove. Remove any remnants of food and foreign bodies in the area of the impeller. Troubleshooting E:18 indicates the water supply hose is kinked. E:22 indicates filters are soiled or blocked. E:25 indicates the wastewater pump is blocked. Rust spots on cutlery may occur if cutlery is not sufficiently rust-resistant. Detergent residue may be present if spray arms were blocked by tableware.