BOSCH SMS6EMI65M Dishwasher
en
Before using for the first time, read the instruction manual and the safety information it contains.
Setting up Home Connect
Overview of water hardness settings
Setting the water softening sys-
tem
Programmes
You can find an overview of the
water hardness values that can
be selected here.
A table of country-specific units
can be found in the instruction
manual.
The programme data has been meas-
ured in the laboratory according to
European standard EN 60436.
The consumption figures depend on
the programme and additional func-
tion selected.
The running time will change if the
rinse aid system is switched off or
rinse aid needs to be added.
Medium
Medium
Medium
Hard
Hard
Hard
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
H:02
H:03
H:04
H:05
H:06
H:07
Tip: Connect your appliance to a mobile device. You can con-
veniently change all settings using the Home Connect app.
1. Press
.
2. To open the basic settings, press
for 3 seconds.
a The display shows H:xx.
1. Install the Home Connect app on your mo-
bile device and follow the instructions.
a The display shows
.
3. Press
or repeatedly until the
Hardness mmol/l
range
Setting
value
right water hardness has been set.
4. To save the settings, press
for 3 seconds.
2. Scan the QR code with the Home Connect
app.
Soft
Soft
0 - 1.1
1.2 - 1.4
H:00
H:01
Programme
1) Duration [h:min]
2) Energy [kWh]
3) Water [l]
1) 2:10 - 2:15
2) 1.300 - 1.350
3) 9.0 - 12.0
1) 1:45 - 2:45
2) 0.750 - 1.250
3) 5.0 - 14.0
1) 4:35
Intensive 70°
Auto 45-65°
Eco 50°
Adding special salt
To avoid damage to the appliance, only add special
salt to the dispenser for special salt just before the
programme starts.
1. Unscrew the lid of the dispenser for special salt
and remove.
2. On initial start-up: Fill the dispenser right up with
water.
3. Add the special salt to the
dispenser. The water in the
dispenser is displaced and
forced out. Never add de-
tergent.
2) 0.666
3) 7.4
1) 4:05
2) 0.950
Silence 50 1
Glass 40°
3) 6.8
1) 1:40 - 1:45
2) 0.700 - 0.750
3) 10.0 - 13.5
1) 1:00
4. Place the lid back on the dispenser and turn to
close.
2) 1.200
Express 65° - 1h
3) 10.5
Adding rinse aid
1) 0:35 2
1. Press the catch on the lid
2. Add rinse aid up to the
max mark.
2) 0.700
3) 10.0
of the dispenser for rinse
Express 45°
aid
and lift
.
1
Suitable programme for running at night: it
takes longer, but is extremely quiet.
half standard load
2
3. Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
Adding detergent
1. Add the detergent to the
dry detergent dispenser.
2. Close the lid of the deter-
gent dispenser.
a The lid clicks into position.
How to use your appliance
1. Load the tableware.
tate freely.
2. Add detergent.
3. Switch on the appliance
4. Select the programme.
5. Start the programme
6. Remove the tableware at the end of the pro-
gramme.
7. To cancel the programme, press
for
Only clean tableware that is suitable for dish-
washers. Remove large remnants of food from
the tableware. Check that the spray arms can ro-
approx. 4 seconds.
.
The programme is cancelled and ends after ap-
prox. 1 minute.
.
General | Details |
---|---|
Name | BOSCH SMS6EMI65M Dishwasher |
Make | Bosch |
Language | English |
Filetype | PDF (Download) |
File size | 0.45 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher

BOSCH SMV4HCX48E Dishwasher
BOSCH SMS6EMI65M Dishwasher Overview
Summary of Contents
- Page 1: Before using for the first time, read the instruction manual and the safety information it contains. Overview of water hardness settings. You can find an overview of the water hardness values that can be selected here. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Add the detergent to the dry detergent dispenser. Load the tableware. Only clean tableware that is suitable for dishwashers.
- Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and clean the filter elements under running water. Re-assemble the filter system and ensure proper installation. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages. Insert the lower and upper spray arms securely. Clean wastewater pump Disconnect the appliance from the power supply before cleaning. Remove any remnants of food and foreign bodies in the area of the impeller. Troubleshooting Identify faults and their causes, such as blocked wastewater pump or soiled filters. Ensure the water supply is turned on and the hose is not kinked. Check for rust spots on cutlery and ensure proper arrangement of tableware. Clean the spray arms and filters if necessary. Reset the appliance if electronics detect a fault.