Home > Electrolux > Electrolux ESG89400UX Dishwasher
Electrolux ESG89400UX Dishwasher
12
All the consumption values
mentioned in this section are
determined in line with the
currently applicable standard
in laboratory conditions with
water hardness 2.5mmol/L
(water softener: level 3)
according to the regulation:
2019/2022 .
Water softener
Amount of water
(l)
level
1
250
100
62
47
25
17
10
5
2
3
4
The pressure and the
temperature of water as well
as the variations of the
mains supply can change
the values.
5
6
7
8
How to set the water softener
level
Make sure the appliance is in user mode.
9
3
10
3
In case of the high water softener setting,
it may occur also in the middle of the
programme, before the rinse (twice
during a programme). Regeneration
initiation has no impact on the cycle
duration, unless it occurs in the middle of
a programme or at the end of a
programme with a short drying phase. In
such cases, the regeneration prolongs
the total duration of a programme by
additional 5 minutes.
1. Press
.
•
•
•
The indicator
The remaining indicators are off.
The display shows the current
still flashes.
setting: e.g.
= level 5.
2. Press repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin
in the same cycle or at the beginning of
the next programme. This activity
increases the total water consumption of
a programme by additional 4 litres and
the total energy consumption of a
programme by additional 2 Wh. The
rinsing of the softener ends with a
complete drain.
7.3 The rinse aid level
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot
rinse phase.
You can set the released quantity of
rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Factory setting: level 4.
Each performed softener rinse (possible
more than one in the same cycle) may
prolong the programme duration by
another 5 minutes when it occurs at any
point at the beginning or in the middle of
a programme.
When the rinse aid chamber is empty,
the rinse aid indicator is on, notifying to
refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
you can deactivate the dispenser and the
indicator. However, for the best drying
performance, always use rinse aid and
keep the rinse aid indicator active.
To deactivate the rinse aid dispenser and
indicator, set the level of rinse aid to 0.
| General | Details |
|---|---|
| Name | Electrolux ESG89400UX Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
BOSCH SMV4EVX14E Fully Dishwasher
BOSCH SHE3AEE5N Dishwasher
FOTILE SD2F-P3/SD2F-P3L 2 In 1 Sink Dishwasher
FISHER and PAYKEL DD24STI9 N Dishwasher
FISHER and PAYKEL DD24SI9 N Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher
BOSCH SMS4HMI06E Dishwasher
FISHER PAYKEL DW60UN4X2 Built-under Dishwasher
SAMSUNG DW80B70 Smart Dishwasher
Whirlpool WFC 3C26 X UK Dishwasher