Home > FISHER and PAYKEL > FISHER and PAYKEL Built Under Dishwasher

FISHER and PAYKEL Built Under Dishwasher

2

PRELIMINARY SPECIFICATION GUIDE

BUILT-UNDER DISHWASHER, 60CM, SANITISE

PRODUCT SPECIFICATIONS

PLUMBING AND ELECTRICAL

Model No.

Dimensions

Electrical

Supply

DW60UC4X2

H 820-880mm W 597mm D 574mm

230V, 50Hz

Service

10A

Receptacle

Plumbing

Supply

3-prong grounding-type

100-160mm*

3/4 BSP (20mm) connector water inlet hose

60mm

Min 34.5 kPa, max 1034 kPa

REAR VIEW

ISO VIEW

Pressure

Cold water connection @ max 20°C

Service outlet at rear extends both sides, hoses and cords can be routed to either or both sides.

*Depending on adjustment of levelling feet.

PRODUCT DIMENSIONS

CAVITY DIMENSIONS: STANDARD INSTALLATION

PROFILE VIEW

ISO VIEW

Overall height*

820-880

597

Minimum overall height*

Minimum overall width

Minimum overall depth

min. 820

600

Overall width**

Overall depth

574

min. 580

*Depending on adjustment of levelling feet

Depth of open door

Height of custom toe kick panel

620

65-200

min. 595ꢀ

52 - 122

103-163

Minimum width of custom toe kick panel***

Depth of toe kick recess****

Height from floor to door panel base

*Depending on adjustment of levelling feet

**Excluding side seals

***Continuous toe kick installations are possible

****Assuming 18mm custom panel

90002435 Date: 21.07.2022 | Product speciﬁcations may vary from those shown in this Preliminary Speciﬁcation Guide. This document is superseded and will become obsolete upon launch of the prod-

uct. This Preliminary Speciﬁcation Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Speciﬁc

installation guidance will be available with the product on delivery and on our website ﬁsherpaykel.com