Home > Home Appliances > Home Appliances QW-NA1CF47EI-EU Dishwasher

Home Appliances QW-NA1CF47EI-EU Dishwasher

2. INSTALLATION  
WARNING: Use the new water inlet  
hose supplied with your machine, do not  
use an old machine’s hose.  
2.1. Machine positioning  
When positioning the machine, place it in  
an area where dishes can be easily loaded  
and unloaded. Do not put the machine in an  
area where the ambient temperature falls  
below 0°C.  
WARNING: Run water through the  
new hose before connecting.  
Read all warnings located on the packaging  
before removing the packaging and  
positioning the machine.  
Place the machine close to a water tap  
and drain. Take into consideration that the  
connections will not be altered once the  
machine is in position.  
WARNING: Connect the hose  
directly to the water inlet tap. The pressure  
supplied by the tap should be a minimum  
of 0.03 MPa and a maximum of 1 MPa. If  
the pressure exceeds 1 MPa, a pressure  
relief valve must be fitted between the  
connection.  
WARNING: After the connections are  
made, turn the tap on fully and check  
for water leaks. Always turn off the  
water inlet tap after a wash program has  
finished.  
Do not hold the machine by its door or  
panel.  
Leave an adequate distance around the  
machine to allow ease of movement when  
cleaning.  
Ensure the water inlet and outlet  
hoses are not squeezed or trapped  
and that the machine does not stand  
on the electrical cable while positioning.  
Adjust the feet so the machine is level and  
balanced. The machine should be placed  
on flat ground otherwise it will be unstable  
and the door of the machine will not close  
properly.  
An Aquastop water spout is available  
with some models. Do not damage it  
or allow it to become kinked or  
twisted.  
2.2. Water connection  
We recommend fitting a filter to your water  
inlet supply in order to prevent damage to  
your machine due to contamination (sand,  
rust, etc.) from indoor plumbing. This will  
also help prevent yellowing and deposit  
formation after washing.  
Note printing on the water inlet hose!  
If models are marked with 25°, the water  
temperature may be max. 25 °C (cold  
water).  
For all other models:  
Cold water preferred; hot water max.  
temperature 60 °C.  
2.3. Water inlet hose  
EN - 6  
GeneralDetails
NameHome Appliances QW-NA1CF47EI-EU Dishwasher
MakeHome Appliances
LanguageEnglish
FiletypePDF (Download)
File size0.99 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Home Appliances QW-NA1CF47EI-EU Dishwasher