AUDIBAX Haze 1500 Pro Fully Integrated Dishwasher

1

2

3

4

USER´S  

MANUAL  

Haze 1500 Pro  

Address Setup:  

Press the MODE button a number of times until Add appears on the display, with the UP /  

DOWN buttons the start address may be set. The start address is defined as a first channel to  

which the machine will respond to. Check that there are no overlapping channels used!  

CLEANING  

After 40 operating hours, the haze machine must be cleaned to avoid deposits in the  

machine, pump and heater.  

Haze 1500 Pro  

Please read the manual before using the product  

7

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	AUDIBAX Haze 1500 Pro Fully Integrated Dishwasher
Make	AUDIBAX
Language	English
Filetype	PDF (Download)
File size	0.15 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• AUDIBAX

AUDIBAX Haze 1500 Pro Fully Integrated Dishwasher Overview

Summary of Contents

• Page 1: Haze 1500 Pro Address Setup: Press the MODE button a number of times until Add appears on the display. The start address is defined as the first channel to which the machine will respond to. Check that there are no overlapping channels used. Cleaning: After 40 operating hours, the haze machine must be cleaned to avoid deposits in the machine, pump, and heater. Please read the manual before using the product.
• Page 2: Congratulations on the purchase of this product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Adjust the DMX address for DMX control. Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Use only water-based fluid recommended by your dealer. Poor liquid can cause permanent damage, clogging, and spitting of unevaporated liquid. Always install the smoke machine in an area with adequate ventilation. Never aim the smoke at yourself, people, or animals. Drain the tank before transporting or storing the product. For indoor use only. If you are using a standard DMX controller, connect the DMX-output of the controller directly to the DMX input of the first unit in a DMX-chain. Adjust the interval between each fog emission within the range of 1 to 100 seconds. Adjust the duration of each fog emission within the range of 1 to 100 seconds.
• Page 3: Manual de usuario Haze 1500 Pro Si usa un controlador con conexión DMX de 5 pines, necesitará usar un adaptador de 5 pines a 3 pines. En el último dispositivo, el cable DMX debe terminarse. Configuración de dirección: Presione el botón MODE varias veces hasta que aparezca Agregar en la pantalla. Con los botones ARRIBA / ABAJO se puede configurar la dirección de inicio. La dirección de inicio se define como un primer canal al que responderá la máquina. Compruebe que no se utilizan canales superpuestos. Después de 40 horas de funcionamiento, la máquina de neblina debe limpiarse para evitar depósitos en la máquina, la bomba y el calentador. Por favor, lea el manual antes de usar el producto.
• Page 4: Haze 1500 Pro Lea detenidamente este manual antes de utilizar el producto para beneficiarse al máximo de todas las funciones. Ajuste la duración de cada emisión de niebla dentro del rango de 1 a 100S. Ajuste la salida de volumen durante la función de temporizador dentro del rango de 0-100%. Ajuste la dirección DMX para el control DMX. Controle la velocidad del ventilador durante la salida. Utilice únicamente fluidos a base de agua recomendados por su distribuidor. Asegúrese de que la máquina de humo esté colocada sobre una superficie estable y antideslizante. Nunca dirija el humo hacia usted mismo, personas o animales. Drene el tanque antes de transportar o almacenar el producto. Pulse la tecla Timer para activar la función de temporizador.