BOSCH SMS46KW02E Dishwasher

1

2

en  

Short and handy...  

Overview of water hardness settings  

Setting water softening system  

Programs  

... everything your dishwasher needs.  

You can find an overview of the  

The programme data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the programme and additional func-  

tion selected.  

The running time will change if the  

rinse aid system is switched off or  

rinse aid needs to be added.  

Medium  

Medium  

Medium  

Hard  

Hard  

Hard  

1.5 - 1.8  

1.9 - 2.1  

2.2 - 2.9  

3.0 - 3.7  

3.8 - 5.4  

5.5 - 8.9  

H02  

H03  

H04  

H05  

H06  

H07  

1.  

Press  

.

Before using for the first time, make sure you read both the op- water hardness values that can  

2. Hold programme button A and press  

repeatedly until the display  

shows H:xx.  

erating and the installation instructions.  

be selected here.  

A table of country-specific units  

can be found in the instruction  

manual.  

3. Release programme button A and  

.

a Programme button A flashes.  

4. Press programme button C re-  

peatedly until the right water hard-  

ness has been set.  

Hardness mmol/l  

range  

Setting  

value  

Soft  

Soft  

0 - 1.1  

1.2 - 1.4  

H00  

H01  

Program:  

1) Duration [h:min]  

2) Energy consump-  

tion [kWh]  

5. Press  

to save the setting.  

3) Water [l]  

1) 2:15 - 2:15  

2) 1.450 - 1.450  

3) 15.0 - 15.0  

1) 1:35 - 2:40  

2) 0.950 - 1.550  

3) 9.0 - 19.0  

1) 3:30  

/

Intensive 70°  

Adding special salt  

/

Auto 45-65°  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

/

2) 0.937  

Eco 50°  

3) 9.5  

1) 1:30 - 1:30  

2) 0.900 - 0.900  

3) 14.0 - 14.0  

1) 1:00  

2) 1.300  

3) 10.0  

/

Glass 40°  

4. Place the lid back on the dispenser and turn to  

close.  

1 hr Programme  

1) 0:15  

/

2) 0.050  

Adding rinse aid  

PreRinse  

3) 4.0  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

of the dispenser for rinse  

2

aid  

and lift  

.

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 ml  

25 ml  

15 ml  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 3 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMS46KW02E Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.44 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMS46KW02E Dishwasher Overview

Summary of Contents

• Page 1: Short and handy overview of water hardness settings. Setting the water softening system is essential for optimal performance. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added. To avoid damage to the appliance, only add special salt to the dispenser just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Load the tableware before starting the appliance. Only clean tableware that is suitable for dishwashers should be used. To cancel the programme, press for approximately 3 seconds.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and scoop out any water. Clean the filter elements under running water. Re-assemble the filter system and insert it into the appliance. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages. Insert the lower spray arm and upper spray arm securely. Troubleshooting E:18 indicates the water supply hose is kinked. E:22 lights up when filters are soiled or blocked. E:25 lights up if the washing programme selected is too weak. Rust spots on cutlery may be due to insufficient rust resistance. Detergent residue may indicate blocked spray arms or improper arrangement of tableware.