SIEMENS SN25ZI08CE Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

Translated from Dutch to English - www.onlinedoctranslator.com  

SN25ZI08CE  

Dishwasher  

Usermanual  

Siemens Home Appliances  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	SIEMENS SN25ZI08CE Dishwasher
Make	SIEMENS
Language	English
Filetype	PDF (Download)
File size	1.63 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• SIEMENS

SIEMENS SN25ZI08CE Dishwasher Overview

Summary of Contents

• Page 1: Dishwasher User manual Siemens Home Appliances
• Page 2: Refer to the Digital User's Guide for more information. Safety General instructions Destination of the device Restriction of Users Secure Installation Safe use Damaged device Dangers for children Before first use Commissioning for the first time Avoiding Property Damage Environmental protection and saving energy Set up and connection Getting to know your device Programs Additional functions Rinse system Detergent Crockery
• Page 3: Loading crockery Unloading crockery Transporting the device Disposal of your old appliance Essentials of the operation Switching on the device Set program Start program After-sales service Technical data
• Page 4: Safety instructions should be observed carefully. Keep the operating instructions and product information for future reference. Do not connect the device if there is transport damage. The device is intended for washing dishes only. It is for domestic use in enclosed spaces within the home. The device can be used up to an altitude of 2500 m above sea level. Children aged 8 and above can operate the appliance if supervised or instructed. Children must not play with the appliance, and maintenance should not be done by them unless supervised. Ensure that children under 8 cannot reach the device or the connection cable. Improper installations can cause injury; follow the setup and connection instructions carefully.
• Page 5: WARNING ‒ Risk of electric shock! Improper installations are dangerous. Only connect and operate the device in accordance with the information on the rating plate. Always use the power cord supplied with the new device. Only connect the device to an alternating current mains via a properly installed socket with earthing contact. The protective earthing system of the domestic electrical installation must be installed in accordance with the electrotechnical regulations. Never power the device through an external switching device, e.g. a time switch or remote control. When the appliance is installed, the mains plug of the mains connection cable must be freely accessible. Cutting the supply hose or immersing the AquaStop valve in water is dangerous. WARNING ‒ Risk of fire! Using an extended power cord and unauthorized adapters is dangerous. Do not use extension cords or multiple sockets.
• Page 6: Contact between the device and installation pipes can lead to failure of the installation pipes. Make sure that there is a distance of at least 5 cm between the device and the installation pipes. Improper installation can lead to burns. For free-standing appliances, make sure that the back of the appliances is against a wall. Non-compliance with the safety instructions and instructions for use on the packaging of dishwasher detergents and rinse aids can lead to serious health damage. Observe the safety instructions and instructions for use on the detergent and rinse aid packaging. Solvents in the rinsing chamber of the device can lead to explosions. Never put solvents in the washing area of the appliance. Never use strongly corrosive alkaline or strongly acidic cleaning agents in combination with aluminum objects in the dishwasher.
• Page 7: Safety warnings regarding the appliance include risks of injury, burns, tipping over, and electric shock. An open appliance door can lead to injuries; only open it to load and unload dishes. Do not sit or stand on the open appliance door, as sharp objects can cause injuries. Place knives and sharp objects with points down in designated areas. Opening the appliance door while a program is running can cause hot water to splash out. Overloaded crockery baskets can cause the appliance to tip over; avoid overloading. Use the device only in closed rooms to prevent electric shock from penetrating moisture. Avoid exposing the device to excessive heat and humidity, and do not use steam or high-pressure cleaners. Keep the power cord away from hot parts and sharp edges to prevent damage and hazards. The blowout of the zeolite reservoir can become hot; do not touch the blow-out opening.
• Page 8: Damaged device A damaged device or power cord is dangerous. Never use a damaged device. Never use a device with a cracked or broken surface. If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse. Only trained specialist personnel may carry out repairs on the device. Only original spare parts may be used for repairing the device. Dangers for children Children can pull packaging material over their heads and become entangled and suffocated. Keep packaging material away from children. Do not let children play with small parts.
• Page 9: Never allow children to play with or operate the device. Children can lock themselves in the appliance and endanger their lives. In the case of discarded appliances, unplug the mains cable, then cut the mains cable and damage the appliance door lock. Children can become trapped between the appliance door and the cabinet doors below with high-mounted appliances. Watch out for children when opening and closing the appliance door. Dishwasher and rinse aids can cause burns to the mouth, throat, and eyes. Keep children away from detergents and rinse aids. The water in the wash cabinet is not drinking water. Residues of detergent and rinse aid may still be present. Children can get their little fingers caught in the slots of the tablet tray and injure themselves.
• Page 10: To avoid contact between the unit and water pipes, maintain a distance of at least 5 cm between the appliance and the water pipe. Improper installation can lead to damage; follow installation instructions for household appliances when installing the dishwasher. Never kink, pinch, alter, or cut water hoses to prevent material damage. Only use supplied or original replacement water hoses. Ensure water pressure is between 50 kPa (0.5 bar) and 1000 kPa (10 bar) for proper device function. If water pressure exceeds the maximum value, install a pressure reducing valve. Do not install the dishwasher under a hob to prevent damage from escaping water vapor. Allow the appliance to cool down briefly before opening the door after the program ends. Avoid installing the dishwasher near heat sources like radiators or cookers. Spilled softener salt can corrode the rinse aid container; ensure it is flushed out.
• Page 11: Environmental protection and saving The softening salt must be filled into the softening salt container immediately before the program starts. If you follow these instructions, your appliance will use less electricity and water. Dishwasher detergent can damage the water softener. Use the Eco 50° programme. Only fill the water softener tank with softening salt for dishwashers. The Eco 50° program is energy-saving and environmentally friendly. The device is equipped with a zeolite reservoir. Energy can be saved by means of zeolite drying. Zeolite is a mineral that can store and release moisture and heat energy. The packaging materials are environmentally friendly and can be reused.
• Page 12: Set up and connect a continuous worktop that is permanently connected to the adjacent cabinets. For correct use, connect the device to electricity and water in a professional manner. Observe the safety instructions. Check the contents of the package and the condition of the device. The required installation dimensions can be found in the installation instructions. Level the appliance using the adjustable feet. Install the drain water connection. Connect the device to the power. You can install your substructure or built-in appliance in the kitchen unit between wooden and plastic walls. Make sure that the drain hose is not kinked, crushed or tangled.
• Page 13: Drinking water connection Connect the device to a drinking water connection. If you replace the device, use a new water supply hose. You will find the necessary steps in the supplied installation manual. Connect the device to the drinking water connection using the enclosed parts. Make sure that the drinking water connection is not kinked, crushed, or entangled. Electrical connection Connect the device electrically. Take the safety rules in mind. Please note that the protection system only works when the device is supplied with power. Check the mains plug for tightness.
• Page 14: Get to know your device Detergent dispenser Pour the detergent into the detergent dispenser. Add softening salt to the water softener salt reservoir. The lower spray arm cleans the dishes in the lower basket. If the dishes are not cleaned optimally, clean the spray arms. During the wash cycle, tabs automatically fall from the detergent compartment into the tablet compartment. The upper spray arm cleans the dishes in the upper basket. The suction opening is used for drying with zeolite. The outlet opening is used for drying with zeolite. Pour rinse aid into the rinse aid reservoir.
• Page 15: Get to know your device Controls You can use the control panel to set all the functions of your device and obtain information about the operating status. Some keys perform various functions. ON/OFF key Switch on device Switch off device Cancel program Information about the remaining time or basic settings is shown in the display. You can change the basic settings via the display and the adjustment buttons. WLAN indication Softening indicator Add salt to fill softening system Program keys and extra functions Additional functions
• Page 16: Get to know your device. Start key. Test. Start program. Select start time. Top up rinse aid indicator. Open the appliance door. Symbols on the display. When the refill water softener salt indicator lights up on the display, fill in the water softener salt reservoir immediately before the program starts. When the rinse aid refill indicator lights up on the display, refill rinse aid.
• Page 17: Get to know your device. If you have activated the key lock, the symbol lights up in the display. If a fault occurs in the water supply or water drainage, the symbol lights up or flashes on the display.
• Page 18: Programs overview includes adjustable programs available on the machine's control panel. Running time varies based on the selected program, water temperature, and amount of dishes. Consumption values are provided in the quick guide and apply to normal conditions with specific water hardness. Factors like water temperature and pipe pressure can cause deviations in consumption values. Different programs are designed for varying degrees of soiling and selected extra functions. Intensive program is suitable for pots, pans, and heavily soiled crockery. Sensor optimized program adjusts based on the degree of pollution in the dishwater. Eco program is the most economical option for slightly dried food scraps. Time-optimized program is designed for quick cleaning of mixed crockery. Each program has specific temperature settings and cleaning stages tailored to the degree of pollution.
• Page 19: Program usage includes various settings such as cleaning at 45 °C, intermediate rinse, and sensitive crockery care. The speed program operates at 45 °C and is designed for lightly soiled dishes. Machine cleaning can be performed at 70 °C for optimal results. The Eco 50° program has a longer running time due to extended soaking and drying, ensuring better consumption values. The Pre-rinse program is suitable for all types of crockery and involves cold rinsing for pre-cleaning. Additional programs can be downloaded via the Home Connect app and stored on the device. Test institutes receive specific instructions for conducting comparison tests according to EN60436. To save a favorite program, users must press the program button and the desired additional function. The selected program and additional function will flash to indicate they have been saved. Users can inquire about product details via email, requiring the product number and production number found on the appliance door.
• Page 20: To reset the program to the pre-wash program saved at the factory, you can use the Home Connect app or reset the device to factory settings.
• Page 21: Additional functions overview includes adjustable features on the machine's control panel. The intensive zone function increases spray pressure for heavily soiled pots and pans while maintaining maximum program temperature longer. Gloss dry function improves drying by increasing water amount and extending the drying phase, which also increases energy consumption. VarioSpeedPlus can shorten running time by 15% to 75% and can be activated before or during the program run. The equipment overview provides information on the possible equipment of the device and its usage, which varies by device variant.
• Page 22: Lower or raise the basket evenly. Place cups, glasses and small dishes in the upper basket. Make sure that the upper basket is at the same height on both sides. You can adjust the height of the upper crockery basket to make room for larger crockery. The crockery basket clicks into place. Adjust the upper basket with the side handles. To wash large items of crockery in the crockery baskets, you can adjust the shelf height of the upper crockery basket. Use the etagère and the space below to store small cups and glasses or for larger pieces of cutlery. If you don't need the étagère, you can fold it up.
• Page 23: Lower crockery basket Use the foldable plate supports to safely store crockery such as plates. Large plates with a diameter of up to 31 cm can be placed in the lower basket. You can fold down the foldable plate supports for better storage of pans, dishes, and glasses. If you don't need the foldable plate supports, fold them over. Push the lever forward and fold down the foldable plate supports.
• Page 24: To use the foldable plate supports again, fold them up. The device is set up and connected. Fill with softening salt. The foldable plate supports click audibly into place. Fill with rinse aid. Arrange the cutlery in the cutlery drawer. Switch on device. Set water softening. Set amount of rinse aid. Fill the detergent. Start the program with the highest cleaning temperature without dishes. We recommend that you use the appliance without dishes before using it for the first time due to possible water stains and other residues. Place the cutlery with the pointed and sharp side down. Hard, calcareous water leaves limescale residues on the dishes and the rinse aid container and can clog parts of the appliance. For good dishwashing results, you can soften water with the water softener and softener salt. To prevent damage to the appliance, water with a hardness of more than 7 °dH must be softened. You can determine the water hardness from your local water supply company or water hardness tester.
• Page 25: Softening system Water hardness Set value for water hardness ranges from soft to hard. You can soften the water with softening salt. With a water hardness of 0 - 6 °dH, softening salt is not needed. Refill the salt in the salt reservoir immediately before the program starts. The consumption of softening salt depends on the water hardness. Set the device to the water hardness. Dishwasher detergent can damage the water softener. Only fill the water softener tank with softening salt for dishwashers. The factory setting for water hardness is H04.
• Page 26: Softening system Unscrew and remove the lid of the softener salt reservoir. When using for the first time, fill the tank completely with water. Only use softening salt for dishwashers. To prevent damage to the appliance, only switch off the water softener in specific cases. Do not use salt tablets or table salt. The water hardness is max. 21 °dH and you can use a combined detergent with salt substitutes. Put the softening salt in the softening salt tank. The water hardness is 0 - 6 °dH; you do not need to use water softener salt. Completely fill the softening salt reservoir with softening salt. If the refill water softener indication bothers you, the water softener can be switched off and the salt refill indicator deactivated.
• Page 27: Final rinse system To maintain trouble-free operation of the water softener, the device regularly regenerates the water softener. For optimum drying results, you should use the best rinse aid. The softening system is regenerated in all programs before the end of the main wash cycle. Only use rinse aid for domestic dishwashers. If the rinse aid refill indicator lights up, refill rinse aid. Here you will find an overview of the maximum additional running time and consumption values when regenerating the softening system. The consumption values stated are laboratory measured values, which are determined according to the currently valid standard. Top up the rinse aid up to the max mark. If rinse aid has overflowed, it must be removed from the rinse aid container.
• Page 28: Dishwasher detergent Overflowing rinse aid can lead to excessive foaming during the wash cycle. The function of the rinse aid is limited in combined detergents. You will usually achieve better results by using rinse aid. If streaks or water stains remain on the dishes, adjust the amount of rinse aid. Only use detergents that are suitable for dishwashers. Suitable for both non-combined and combined detergents. For optimal washing and drying results, use a non-combined detergent in combination with separate water softener salt and rinse aid. At a low setting, less rinse aid is added during the wash cycle, which reduces streaks on the dishes. At a higher setting, more rinse aid is added during the wash cycle, reducing water stains and improving drying results. If the rinse aid refill indicator bothers you, switch off the rinse aid system.
• Page 29: Dishwasher detergent The dosage can be adjusted according to the degree of soiling. Detergents usually have a low alkaline recipe with enzymes. Enzymes break down starch and dissolve proteins. Oxygen-based bleaching agents are usually used to remove colored stains. Non-combined detergents are products that do not contain any other components apart from the actual detergent. With powder and liquid detergent, the dosage can be adjusted to the degree of soiling of the dishes. It is recommended that you also use water softening salt and rinse aid for better washing and drying results. Tabs are suitable for all dishwashing tasks and do not need to be dosed. Powder detergent is recommended for shortened programmes. Liquid detergents work faster and are recommended for shortened programs.
• Page 30: Damage to glass and crockery can occur if items are not marked as dishwasher safe. Prevent damage by using appropriate dishwasher detergent. Avoid using highly caustic alkaline or strong acidic detergents. Only wash crockery that is marked as dishwasher resistant. Arrange dishes correctly to achieve optimum washing results. Use less energy and water compared to manual washing. Load the appliance to the specified number of standard place settings. Remove glass and cutlery shortly after the end of the program. Choose a program with the appropriate temperature for the items being washed. Consult the website for examples of efficient appliance organization.
• Page 31: For better washing and drying results, place crockery with curves or cavities at an angle so that the water can run off. Remove coarse food residues from the crockery to avoid risk of injury. Hot crockery can cause burns and is sensitive to impact. To save natural resources, do not pre-rinse the dishes under running water. After the program has ended, let the dishes cool down for a while before removing them. Place heavily soiled crockery such as pans in the lower basket for better washing results. Empty the dishes from bottom to top to prevent drops of water from falling on them. Check the rinse aid reservoir and accessories for contamination and clean if necessary. Load cutlery with the pointed and sharp side down to prevent injuries. Make sure that you do not block the spray arms so that they can rotate.
• Page 32: The Eco 50° program is environmentally friendly and suitable for normally soiled crockery. It is the most efficient program in terms of energy and water consumption and complies with the EU ecodesign regulation. You can adjust the rinsing to the degree of soiling of the dishes by setting a suitable program. If you want to add crockery while the appliance is already running, do not use the tablet tray as a handle for the upper basket. The program is set and the program button flashes. The remaining program running time appears on the display. In addition to the selected rinsing program, you can set additional functions. The key lock prevents the device from being operated unintentionally or improperly while it is in operation. You can postpone the program start by up to 24 hours. The appliance switches off automatically 1 minute after the end of the program. If you open the door immediately after the program has ended, the appliance will switch off after 4 seconds. The additional functions available depend on the program selected.
• Page 33: When the device is operated, flashes on the display. In the event of a power failure, the key blocking is activated. If you touch the button during the wash cycle, the running program is interrupted. When you switch on the device, the program continues automatically. To deactivate the key lock, press for approximately 3 seconds. If you open the appliance door when heated, leave it ajar for a few minutes to prevent overpressure. To end a program early or change a started program, you must cancel the active program. Press for approximately 4 seconds to cancel the program. Once the indicators are off, 0h:01m appears on the display and the remaining water is pumped out. The program is aborted and closed after approximately 1 minute.
• Page 34: Basic settings allow you to customize your device according to your preferences. The basic settings depend on the equipment of your device. Water hardness can be set to match the water softener. At position H00, the water softening is switched off. The amount of rinse aid can be adjusted, with the option to switch off the final rinse system. Intensive drying increases the final rinse temperature for better drying results, but may not be suitable for sensitive dishes. You can set the device for a cold or hot water connection. Hot water connection is only recommended if it is energetically favorable and a suitable installation is available. The water temperature for hot water must be between 40 °C and 60 °C. Factory settings may differ depending on the device type.
• Page 35: Basic settings include options for display, text, and choice descriptions. Wi-Fi settings allow you to enable or disable the wireless network connection. At position Cn0, the wireless network connection is disabled. This setting is available only after connecting the appliance to the Home Connect app. Remote Start settings can be activated or deactivated with options rc0, rc1, and rc2. With rc0, the function is permanently deactivated. With rc1, the function can be selected via the button. With rc2, the function is permanently activated. Factory settings allow you to reset changed settings to the factory condition. The settings for the first commissioning must be specified.
• Page 36: To use Home Connect, establish a connection to the WLAN home network and configure it with the Home Connect app. The Home Connect app guides you through the registration process. You can change multiple settings via the Home Connect app. Press and hold to access basic settings. Follow the instructions in the Home Connect app to make the settings. Ensure safety instructions are observed when operating the appliance via the Home Connect app. Connect your appliance to a mobile device to operate functions via the Home Connect app. Install the Home Connect app on your mobile device. The Home Connect services may not be available in every country. Information about Home Connect services can be found on the official website.
• Page 37: Start the Home Connect app and set up access for Home Connect. The device must be connected to the WLAN home network. The appliance should be equipped with the Home Connect app. The Home Connect app guides you through the entire registration process. A program must be selected for the Home Connect functionality. When the appliance door is opened, the function is automatically deactivated. Please observe the instructions regarding the protection of personal data. The appliance transmits specific categories of data to the Home Connect server during the first registration. You can start the appliance with your mobile device via the Home Connect app. Activate the Remote Start function on your device if set to rc1 in the basic settings.
• Page 38: Cleaning and maintenance Home Connect functionalities can only be used in combination with the Home Connect app. Use only suitable cleaning agents to clean the device. Carefully clean and maintain your device to ensure that it continues to function well for a long time. Follow the device maintenance tips to keep the device working for a long time. Never use cleaning agents containing chlorine. Deposits can lead to malfunctions in the device, e.g. due to food residues and limescale. To prevent malfunctions and the formation of nasty smells, it is recommended to clean the appliance at regular intervals. Machine cleaning is the right program for cleaning the machine in combination with machine care products and machine cleaners.
• Page 39: Cleaning and maintenance Machine cleaning is a program that removes various deposits in one rinse cycle. The cleaning is done in two stages. Phase 1: Remove grease and lime using a liquid machinery maintenance product or powdered machine cleaner. Phase 2: Remove food leftovers and deposits with a machine cleaner. For optimum cleaning performance, the program doses the cleaners separately in the respective cleaning phase. If the machine cleaning indicator lights up, carry out machine cleaning without dishes. After performing machine cleaning, the indicator goes out. It is advised to perform machine cleaning every 2 months. Only use machine care products specifically designed for dishwashers. Make sure there are no aluminum objects in the rinsing space of the appliance.
• Page 40: Cleaning and maintenance Machine cleaning is in progress. Once the program is completed, the machine cleaning indicator goes out. Turn the coarse sieve counterclockwise to take the sieve system out. Make sure that no foreign objects fall into the pump reservoir. The sieve system filters coarse contaminants from the flushing circuit. Pull the micro sieve downwards. Check the sieves for food residues after each wash. Contaminants from the washing water can clog the sieves. Press the locking pieces together and remove the coarse sieve upwards.
• Page 41: Cleaning and maintenance Clean the sieve elements under running water. Carefully clean the dirt edge between the coarse and fine sieve. Clean the spray arms regularly to prevent blockages. Unscrew the upper spray arm and pull it downwards. Check the spray arm outlets for blockages under running water. Install the lower spray arm and ensure it engages audibly. Fit the upper spray arm and screw it tight. Verify that the arrow marks are aligned when assembling the sieve system. Check whether the locking lugs of the coarse sieve have clicked into place. Remove any foreign objects from the spray arm outlets.
• Page 42: Troubleshooting You can rectify minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. Only original spare parts may be used for repairing the device. If the power cord of this appliance becomes damaged, it must be replaced with a special cord available from the manufacturer or its service agent. Aquastop system is activated. Close the tap and contact the service department. Water supply hose is kinked. Lay the water supply hose without kinks. The amount of water flowing in with the tap open must be at least 10 l/min.
• Page 43: Troubleshooting Malfunction E:32-00 lights up alternately for water supply. Remove the strainer from the inlet hose. Clean the strainer. Check the water connection for leaks. E:34-00 lights up alternately. Water flows continuously into the appliance. Close the tap. E:61-02 lights up alternately. No device error. Water drain pump is blocked or cover of water drain pump is loose. Clean the drain pump. Tighten the drain pump cover securely.
• Page 44: Troubleshooting Malfunction Cause and troubleshooting E:61-03 lights up alternately The water is not pumped out. Check the connection to the siphon and open it if necessary. Lay the drain hose without kinks. Remove any residue. No device error. Water drain pump is blocked or cover of water drain pump is loose. E:92-40 lights off. Sevenzijn dirty or clogged. Finish the seven.
• Page 45: Troubleshooting Electronics has detected an error. Press the main switch button for approx. 4 seconds to reset and restart the device. If the problem recurs, turn off the device and remove the mains plug from the socket. Wait at least 2 minutes before switching on the device again. If the problem persists, contact the service department. Leftover food on dishes may indicate that dishes are placed too close together or the basket is too full. Ensure there is enough space between dishes for proper cleaning. Clean the spray arms regularly to maintain performance. Refer to the section on Seven re nigen for further instructions.
• Page 46: Troubleshooting Malfunction Cause and troubleshooting Leftover food on it The screens are incorrectly fitted and/or not secured. Fit the sieves properly. Secure the seven. Washing program selected too weak. Choose a more powerful rinsing program. Dishes have been pre-cleaned too well. The sensor system therefore opts for a weak washing programme. Roomy high, narrow stock and servicesgoed niet te scuin e n not in the corners in. The farm lhe id gl a n spools medium is t e hoog n i ge- st d l.
• Page 47: Troubleshooting Malfunction Cause and troubleshooting Arrange the dishes in the upper basket in such a way that the tablet tray is not blocked by dishes. Do not place any dishes or fragrance dispenser in the tablet tray. Only remove coarse food residues and do not pre-rinse the dishes. Use rust-resistant cutlery. Do not wash rusty objects. Remove spilled softener salt from the rinse aid container. Make sure the spray arms are not blocked and can rotate freely. Only put the detergent in a dry detergent dispenser. Fill softener salt. Do not use softening salt tablets.
• Page 48: Transport, storage and disposal Fit the pump cover and press down. Cleaning the drain pump is necessary when dishwater no longer drains properly. Large food scraps or objects can block the drain pump. Warning: Sharp and pointed objects can block the drain pump and cause injury. Carefully remove foreign objects from the pump. Unplug the device from the power outlet before maintenance. Assemble the sieve system after cleaning. Transporting the device requires careful handling to avoid damage. Loosen the drain water connection and drinking water connection before disassembly. Remove the plinth if present before pulling the device forward.
• Page 49: Transport and storage of the device should be frost-proofed if located in a room at risk of frost. Empty the device completely before transport to prevent damage. Children can lock themselves in the appliance, posing a health hazard. For discarded appliances, unplug the mains cable, cut it, and damage the door lock to ensure it cannot close. Transport the device in an upright position to prevent water damage. Dispose of the device in an environmentally friendly manner. Information about current disposal methods can be obtained from your dealer or local council office. The appliance is marked in accordance with the European directive on waste electrical and electronic equipment (WEEE). The directive outlines the framework for take-back valid in the EU. To empty the appliance, cancel the program after approximately 4 minutes.
• Page 50: Service department Aqua-Stop guarantee In addition to the warranty claims against the seller based on the purchase agreement and our manufacturer's warranty, you will be indemnified if the following conditions are met. Original replacement parts that are relevant for operation in accordance with the respective Ecodesign Regulation can be obtained from our service department for a period of at least 10 years from the time of placing the device on the market within the European Economic Area. If due to an error in the AquaStop system is caused by water damage, we will compensate the damage of private users. The liability guarantee applies to the life of the device. Condition for entitlement to guarantee is that the appliance with AquaStop has been set up and connected professionally and in accordance with our installation instructions. When you contact the service department, you will need the product number (E-Nr.), the production number (FD), and the serial number (Z-Nr.) of the device. Our guarantee does not cover defective supply lines or fittings up to the AquaStop connection on the tap. While using a device with AquaStop, you do not have to keep up or turn off the tap after use for safety reasons. The product number (E-Nr.), the production number (FD), and the serial number (Z-Nr.) can be found on the rating plate of the device. The rating plate can be found on the inside of the appliance door.
• Page 51: Technical data Weight: Max. 60 kg Tension: Connection value 220 - 240 V, 50 Hz or 60 Hz Power: 2000 - 2400W, 10 - 16A Fuse: Water pressure min. 50 kPa (0.5 bar), max. 1000 kPa (10 bar) Amount of incoming water: min. 10 l/min Water temperature: Cold water, hot water max. 60 °C Capacity: 14 standard place settings More information about your model can be found on the official EU product database EPREL. Model identification consists of the character before the slash of the E number (E-Nr.) on the type plate. This product contains software components licensed as free software or open source software.
• Page 52: Declaration of Conformity BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality complies with the fundamental requirements and the other applicable provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found on the product page of your device in the additional documents. 5 GHz WLAN (WiFi): for indoor use only.
• Page 53: Page 53