BOSCH SMV2ITX09E Dishwasher
Cleaning filters
Cleaning spray arms
Clean wastewater pump
1. After each wash check the filters for
4. Press the locking
1. Unscrew the upper spray arm
and
1. Disconnect the appliance from the power supply.
2. Remove the filter system.
3. Scoop out any water.
4. Prise off the pump cover using a
spoon and grip it by the crosspiece.
residue.
catches
to-
pull down to remove
.
gether and lift
2. Turn the coarse
the coarse filter
filter anticlock-
out
.
wise
and re-
move the filter
system
.
5. Clean the filter elements under running
water.
2. Pull up the lower spray arm to remove.
3. Pull down the mi-
cro filter to re-
move.
6. Re-assemble the filter system.
7. Insert the filter system into the appliance
and turn the coarse filter clockwise.
Make sure that the arrow markings
match up.
5. Lift the pump cover inwards at an angle and remove.
6. Remove any remnants of food and foreign bodies in the area
of the impeller.
7. Insert the pump cover
and press
3. Check the outlet nozzles on the spray arms for blockages un-
der running water and remove any foreign bodies.
4. Insert the lower spray arm.
down
.
a The pump cover clicks into position.
a The spray arm clicks into position.
5. Insert the upper spray arm and screw it firmly in place.
8. Install the filter system.
Troubleshooting
Fault
Cause and troubleshooting
Fault
Cause and troubleshooting
Fault
Cause and troubleshooting
Remnants of food on
tableware.
Tableware is placed too close together or basket is overfilled.
Remnants of food on
tableware.
Filters are inserted incorrectly and/or not engaged.
Rust spots on cutlery.
Cutlery may also rust if washed together with rusting items.
1.
1.
▶
Arrange tableware with sufficient space in between.
The spray jets must reach the surfaces of the tableware.
Avoid points of contact.
Insert the filters properly.
Do not wash rusting items.
2.
Engage the filters.
Detergent residue is
present in the detergent rinsed out.
dispenser or the tablet
collecting tray.
Spray arms were blocked by tableware so detergent was not
2.
Washing programme selected too weak.
▶
Spray arm rotation is blocked.
Check that the spray arms are not blocked and can rotate
freely.
▶
Select a more intensive washing programme.
▶
Arrange tableware so that it does not obstruct spray arm ro-
tation.
Removable streaks are
present on glasses, glass-
ware with a metallic ap-
pearance and cutlery.
Amount of rinse aid to be dispensed is set too high.
All LEDs light up or flash Electronics have detected a fault.
▶
Set the rinse aid system to a lower setting.
or the rinse programme
does not continue run-
ning.
▶
Spray arm nozzles are blocked.
Press the main switch button for approx. 4 seconds.
The appliance is reset and restarted.
No rinse aid has been added.
▶
Clean the Spray arms.
▶
Add rinse aid.
Filters are soiled.
Rust spots on cutlery.
Cutlery is not sufficiently rust-resistant. Knife blades are often
more severely affected.
▶
Clean the filters.
▶
Use rust-resistant tableware.
| General | Details |
|---|---|
| Name | BOSCH SMV2ITX09E Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.43 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher

BOSCH SMV4HCX48E Dishwasher















