BOSCH SMV2ITX48E Dishwasher

1

2

en  

Before using for the first time, read the instruction manual and the safety information it contains.  

Setting up Home Connect  

Overview of water hardness settings  

Setting the water softening sys-  

tem  

Programmes  

You can find an overview of the water hardness values that can be  

selected here.  

A table of country-specific units can be found in the instruction  

manual.  

The programme data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the programme and additional func-  

tion selected.  

The running time will change if the  

rinse aid system is switched off or  

rinse aid needs to be added.  

Tip: Connect your appliance to a mobile device. You can con-  

veniently change all settings using the Home Connect app.  

1. Press  

.

2. To open the appliance settings,  

1. Install the Home Connect app on your mobile device and fol-  

low the instructions.  

2. Scan the QR code with the Home Connect  

app.  

press  

flashes.  

3. Press  

for 3 seconds.  

a

Hardness mmol/l  

range  

Setting  

LED A  

LED B  

LED C  

repeatedly until the right  

water hardness has been set.  

0, 1, 2 or 3 LEDs will light up ac-  

cordingly.  

Soft  

Medium  

Hard  

0 - 1.1  

0

1

2

3

1.2 - 2.9  

3.0 - 3.7  

3.8 - 8.9  

4. To save the settings, press  

Programme  

1) Duration [h:min]  

2) Energy consump-  

tion [kWh]  

Hard  

for 3 seconds.  

3) Water [l]  

1) 2:10 - 2:15  

2) 1.350 - 1.400  

3) 10.5 - 13.5  

1) 1:45 - 2:45  

2) 0.850 - 1.250  

3) 9.5 - 15.5  

1) 4:10  

Intensive 70°  

Auto 45-65°  

Eco 50°  

Adding special salt  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

2) 0.923  

3) 9.5  

1) 1:00  

2) 1.200  

Express 65° - 1h  

Machine Care  

Favourite  

3) 10.0  

4. Place the lid back on the dispenser and turn to  

close.  

1) 2:10  

2) 1.450  

3) 15.0  

1) 0:15 - 0:15  

2) 0.050 - 0.050  

3) 4.0 - 4.0  

Adding rinse aid  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

of the dispenser for rinse  

2

aid  

and lift  

.

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 ml  

25 ml  

15 ml  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 4 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMV2ITX48E Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.43 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMV2ITX48E Dishwasher Overview

Summary of Contents

• Page 1: Before using for the first time, read the instruction manual and the safety information it contains. Overview of water hardness settings. You can find an overview of the water hardness values that can be selected here. The programme data has been measured in the laboratory according to European standard EN 60436. Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Add the detergent to the dry detergent dispenser. Load the tableware. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system. Clean the filter elements under running water. Re-assemble the filter system. Insert the filter system into the appliance and turn the coarse filter clockwise. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages under running water. Insert the lower spray arm. Insert the upper spray arm and screw it firmly in place. Troubleshooting Remnants of food on tableware may be due to tableware being placed too close together or the basket being overfilled. Filters may be inserted incorrectly and/or not engaged. Rust spots on cutlery can occur if washed with rusting items. Detergent residue may be present in the detergent dispenser or the tablet collecting tray. Select a more intensive washing programme if the washing programme is too weak. Set the rinse aid system to a lower setting if removable streaks are present on glasses. Press the main switch button for approx. 4 seconds to reset the appliance if all LEDs light up or flash. Use rust-resistant tableware to avoid rust spots on cutlery.