CANDY CI6C4F1PMW-80 Dishwasher
The delayed time countdown starts
showing on the display "START IN XX:
XX".
DELAY START button
Delay start selection
This button allows you to programme the
start of the wash cycle, with a delay
between 0:30 and 24 hours.
The time will be displayed with 30-minute
intervals over 24 hours and one-minute
intervals over the last 2 hours.
To set the delayed start proceed as follows:
Pressing any button (except the "ON/
OFF, Wi-Fi Enrollment, START/RESET"
buttons for 3 seconds, the programme
name "P XX NAME" is displayed (P +
programme number + programme name)
for one single scroll and then the delay
time is displayed again.
1.Switch on the dishwasher by holding
down the "ON/OFF"
button for about
3 sec.
2.Select the washing programme.
3.Press the "DELAY START"
button
("0:30" will appear on the display).
In the event of a power failure or
shutdown, the dishwasher stores the
time remaining at the start, which will
be resumed at the point where it was
interrupted once the power supply is
restored or the machine is switched
on again.
4.Press the button again to increase the
delay (each time it is pressed, the delay
is increased by 30 minutes, up to a
delay of 4 hours, after each time the
button is pressed it will increase by 1
hour up to
a
maximum of 24:00.
Pressing the button again after a delay
of 24:00 will return to 0:00 (delayed
start disabled).
If you want to cancel the delayed start
proceed as follows:
5.The delayed start settings will remain
visible on the display for 5 seconds, or
Press and hold the "START/RESET"
button for at least 3 seconds. The display
will show "RESET" and beeps will sound.
until the ON/OFF
-
PROGRAM
SELECTION - START/RESET buttons
are pressed.
The delayed start and the selected
programme will be cancelled. Two
dashes will appear on the display.
Changing the programme does not
change the delay time and the LED will
remain on.
At this point, if you want to start the
dishwasher, you will need to set the
desired programme again and select the
option buttons if necessary.
When you press the DELAY START
button, the last setting made will be
displayed.
Activation or exclusion of the DEMO
MODE program:
Countdown and Programme start with
DELAY START
(demonstration program to be used
exclusively in points of sale)
When the delay is set on a programme:
DEMO MODE ACTIVATION
after pressing "START/RESET"
.
ALWAYS start the procedure with the
dishwasher turned off.
The "DELAY START" light stays on until
the end of the time.
35
| General | Details |
|---|---|
| Name | CANDY CI6C4F1PMW-80 Dishwasher |
| Make | Candy |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.9 MB |
(1 votes, average: 5.00 out of 5)
Loading...
CANDY CDIH 2L952-80 Dishwasher
Candy CI 4C6F0PA Fully Dishwasher
Midea WQP12-5201C Dishwasher
gorenje GV62040 Dishwasher
FRIGIDAIRE GALLERY GDPP4517AD Dishwasher
BOSCH GV642 A Fully Integrated Dishwasher
BOSCH SMI2ITB33E Dishwasher
BOSCH SPS2IKI04E Dishwasher
FISHER PAYKEL DD24SAX9N Dishwasher
BOSCH SMD8YCX01G Fully-Integrated Dishwasher
FISHER and PAYKEL DD60SCHX9 FP BI DishDrawer Dishwasher
Robinhood DWG12P6FWH Dishwasher