Home > Electrolux > Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
QUICK OPERATION GUIDE
For detailed operating method read the corresponding content on the instruction manual.
Switch on the appliance
Press the Power switch button to switch on the appliance, Open the door.
Compartment A:
Fill the detergent dispenser
With each wash cycle.
(Follow the user instructions!)
(On models with water softener system only.)
Electric indicator on control panel.
Check the regeneration
salt level
Fill the salt into the softener by the number of
cycles the dishwasher has run.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Load the baskets
Close the door Press the programme button until the selected programme lights up.
Select a programme
( See the section entitled Operation instruction
)
Turn on the water tap and press the Start/Reset button. The machine will start working
after about 10 seconds.
Running the dishwasher
Changing the programme
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Reset button more than 3 seconds to cancel the running programme.
3. Select a new programme.
4. Restart the dishwasher.
WARNING!
Add forgotten dishes in the
dishwasher.
1.Press the start/Reset button to stop the machine.
2.Open the door.
3.Add the forgotten dishes.
4.Close the door, then press the Start/Reset button, the dishwasher will
start running again after 10 seconds.
Open the doorcarefully.
Hot steam mayescape
when the door is opened!
If the appliance is switched
off during a wash cycle.
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
Switch off the appliance
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
Turn off the water tap,
unload the baskets
2
| General | Details |
|---|---|
| Name | Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.29 MB |

Electrolux ESS87300UX Dishwasher

Electrolux EES48401L Dishwasher

Electrolux EFF9392SXA Dishwasher

Electrolux ESZ89400UX 800 SprayZone Dishwasher

Electrolux ESL2500RO Dishwasher

Electrolux KECA7400W Builtin Dishwasher

Electrolux TAPPAN Dishwasher

Electrolux KESC7320L Dishwasher

Electrolux EEC87400W Sliding Door Dishwasher

Electrolux EEA27200L Dishwasher












































