Home > Electrolux > Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
12
the total energy consumption of a
programme by additional 2 Wh. The
rinsing of the softener ends with a
complete drain.
Multi-tabs containing salt are
not effective enough to
soften hard water.
Regeneration process
Each performed softener rinse (possible
more than one in the same cycle) may
prolong the programme duration by
another 5 minutes when it occurs at any
point at the beginning or in the middle of
a programme.
For the correct water softener operation,
the resin of the softener device needs to
be regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
When the prescribed quantity of water
(see values in the table) has been used
since the previous regeneration process,
a new regeneration process will be
initiated between the final rinse and the
programme end.
All the consumption values
mentioned in this section are
determined in line with the
currently applicable standard
in laboratory conditions with
water hardness 2.5mmol/L
(water softener: level 3)
according to the regulation:
2019/2022 .
Water softener
level
Amount of water
(l)
The pressure and the
1
2
250
100
62
47
25
17
10
5
temperature of water as well
as the variations of the
mains supply can change
the values.
3
4
How to set the water softener
level
Make sure the appliance is in user mode.
5
6
7
1. Press
.
8
•
•
•
The indicator
still flashes.
9
3
The remaining indicators are off.
The display shows the current
10
3
setting: e.g.
= level 5.
In case of the high water softener setting,
it may occur also in the middle of the
programme, before the rinse (twice
during a programme). Regeneration
initiation has no impact on the cycle
duration, unless it occurs in the middle of
a programme or at the end of a
programme with a short drying phase. In
such cases, the regeneration prolongs
the total duration of a programme by
additional 5 minutes.
2. Press repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
7.3 The rinse aid level
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot
rinse phase.
You can set the released quantity of
rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Factory setting: level 4.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin
in the same cycle or at the beginning of
the next programme. This activity
increases the total water consumption of
a programme by additional 4 litres and
When the rinse aid chamber is empty,
the rinse aid indicator is on, notifying to
| General | Details |
|---|---|
| Name | Electrolux ESZ89400UX 800 SprayZone Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.1 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Electrolux EEA27200L Dishwasher
BOSCH SHX88CL5N Dishwasher
FISHER AND PAYKEL DD60SDFHTX9 Tall Dishwasher
COMFEE KWH-TD602E-S Compact Dishwasher
BOSCH SMV4HB802E Dishwasher
Haier HDWE15-46BK6EG Dishwasher
smeg DWAU6224N4 Matte Black Underbench Dishwasher
BOSCH SHE4AEM2N Dishwasher
FISHER AND PAYKEL DD24SV2T9 N Dish Drawer Dishwasher
AEG FFB74707PM Dishwasher
AEG FSB34707Z Dishwasher