Home > Electrolux > Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
ENGLISH
23
Problem and alarm code Possible cause and solution
The level of water inside
the appliance is too high.
The display shows iF1.
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation in‐
structions.
The appliance stops and
starts more times during
operation.
•
It is normal. It provides optimal cleaning results and
energy savings.
The programme lasts too
long.
•
•
If the delay start option is set, cancel the delay set‐
ting or wait for the end of the countdown.
Activating options can increase the programme dura‐
tion.
The displayed programme
duration is different than
the duration in the con‐
sumption values table.
•
The pressure and the temperature of the water, the
variations of the mains supply, the options, the quan‐
tity of dishes and the degree of soil can change the
programme duration.
The remaining time in the
display increases and
skips nearly to the end of
the programme duration.
•
This is not a defect. The appliance is working cor‐
rectly.
Small leak from the appli‐
ance door.
•
•
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
The appliance door is diffi‐
cult to close.
•
•
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
Parts of the tableware are protruding from the bas‐
kets.
The appliance door opens
during the wash cycle.
•
•
The AirDry function is activated. You can deactivate
the function. Refer to "Settings".
Rattling or knocking
sounds from the inside of
the appliance.
The tableware is not properly arranged in the bas‐
kets. Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
•
•
The appliance trips the cir‐
cuit-beaker.
The amperage is insufficient to supply simultaneous‐
ly all the appliances in use. Check the socket amper‐
age and the capacity of the meter or turn off one of
the appliances in use.
Internal electrical fault of the appliance. Contact an
Authorised Service Centre.
•
•
The appliance is switched
on but does not operate.
The display shows PF.
Power supply is out of the operating range. The
wash cycle is temporarily interrupted and resumes
automatically once the power is restored.
The appliance switches off
during operation.
•
Complete power outage. The wash cycle is tempora‐
rily interrupted and resumes automatically once the
power is restored.
| General | Details |
|---|---|
| Name | Electrolux ESZ89400UX 800 SprayZone Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.1 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Electrolux EEA27200L Dishwasher
BOSCH SMS4EMW06E Dishwasher
SAMSUNG DW80R9950 Dishwasher
FISHER PAYKEL DW60U2I2 Integrated Dishwasher
Whirlpool DU1014XTXQ Dishwasher
beko DIT39434C2 Fully Integrated Dishwasher
Miele G 7783 SCVi AutoDos K2O FF Dishwasher
Honeywell HDS18SS Dishwasher
FISHER PAYKEL DD60STX6I1 Dishwasher
BOSCH SMS2ITW08G Dishwasher
Miele 12496690 Full Size Dishwasher