Home > Electrolux > Electrolux KESC7325L Dishwasher

Electrolux KESC7325L Dishwasher

11. TROUBLESHOOTING  
Refer to the below table for information on  
possible problems.  
WARNING!  
Improper repair of the appliance may  
pose a danger to the safety of the user.  
Any repairs must be performed by  
qualified personnel.  
With some problems, the display shows an  
alarm code.  
The majority of problems that may occur can  
be solved without the need to contact an  
Authorised Service Centre.  
Problem and alarm code  
Possible cause and solution  
You cannot activate the appliance.  
Make sure that the mains plug is connected to the mains socket.  
Make sure that there is no damaged fuse in the fuse box.  
The programme does not start.  
Make sure that the appliance door is closed.  
If the delay start is set, cancel the setting or wait for the end of the  
countdown.  
The appliance recharges the resin inside the water softener. The dura‐  
tion of the procedure is approximately 5 minutes.  
The appliance does not fill with wa‐  
ter.  
The display shows i10 or i11.  
Make sure that the water tap is open.  
Make sure that the pressure of the water supply is not too low. For this  
information, contact your local water authority.  
Make sure that the water tap is not clogged.  
Make sure that the filter in the inlet hose is not clogged.  
Make sure that the inlet hose has no kinks or bends.  
The appliance does not drain the  
water.  
The display shows i20.  
Make sure that the sink spigot is not clogged.  
Make sure that the interior filter system is not clogged.  
Make sure that the drain hose has no kinks or bends.  
The anti-flood device is on.  
The display shows i30.  
Close the water tap.  
Make sure that the appliance is correctly installed.  
Make sure the baskets are loaded as instructed in the user manual.  
Malfunction of the water level detec‐  
tion sensor.  
The display shows i41 - i44.  
Make sure that the filters are clean.  
Switch the appliance off and on.  
Malfunction of the wash pump or the  
Switch the appliance off and on.  
drain pump.  
The display shows i51 - i59 or i5A -  
i5F.  
The temperature of the water inside  
the appliance is too high or malfunc‐  
tion of the temperature sensor oc‐  
curred.  
Make sure that the temperature of the inlet water does not exceed 60  
°C.  
Switch the appliance off and on.  
The display shows i61 or i69.  
ENGLISH 21  
GeneralDetails
NameElectrolux KESC7325L Dishwasher
MakeElectrolux
LanguageEnglish
FiletypePDF (Download)
File size1.5 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher

Electrolux KESC7325L Dishwasher