Home > Electrolux > Electrolux KESC7325L Dishwasher
Electrolux KESC7325L Dishwasher
6.1 Setting mode
6.2 Factory reset
Factory reset restores the factory defaults. It
does not reset the cycle counter. Before the
reset, make sure the appliance is in setting
mode.
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
Press and hold Previous and Next for 5
seconds.
To enter setting mode, press and hold
simultaneously 30min and ECO for about 3
seconds.
The displays shows _ _ _ for about 5
seconds.
The appliance returns to the programme
selection.
•
The lights related to 60min, 90min
and 160min are on.
The display shows the current value of
the first available setting.
6.3 Cycle counter
You can view the number of completed
dishwashing cycles in the cycle counter.
•
How to navigate in setting mode
Use programme buttons to navigate in setting
mode.
1. Press and hold the on/off button until the
dishwasher is activated.
2. Press and hold Previous and Next for 5
seconds.
•
•
•
60min - Previous button
90min - OK button
The displays shows uC and then the number
of cycles.
160min - Next button
Press any button to exit the cycle counter.
Use Previous and Next to switch between
the basic settings and to change their value.
Use OK to enter the selected setting and to
confirm changing its value.
After reaching 65535, the cycle counter
restarts.
How to change a setting
Make sure the appliance is in setting mode.
6.4 Water softener
The water softener removes minerals from
the water supply, which would have a
negative effect on the washing results and on
the appliance.
1. Use Previous or Next to select the
desired setting.
The display shows the current setting value
(a digit and the dedicated letter).
2. Press OK to enter the setting.
The current setting value flashes.
3. Press Previous or Next to change the
value.
The higher the content of these minerals, the
harder your water is. Water hardness is
measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in your
area. Your local water authority can advise
you on the hardness of the water in your
area.
4. Press OK to confirm the setting.
•
•
The new setting is saved.
The appliance returns to the basic
settings list.
5. Press and hold simultaneously 30min
and ECO for about 3 seconds to exit
setting mode.
Regardless of the type of detergent used, set
the right water softener level to ensure good
washing results and to keep the salt indicator
active.
The appliance returns to the programme
selection.
The saved settings remain valid until you
change them again.
Multi-tabs containing salt are not effective
enough to soften hard water.
ENGLISH 11
| General | Details |
|---|---|
| Name | Electrolux KESC7325L Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.5 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Hotpoint HSFO 3T223 Dishwasher
FISHER PAYKEL DD60SHTI9 Dishwasher
Miele Dishwasher
smeg STU8633 Fully Integrated Dishwasher
FISHER PAYKEL HDW15V2B2 Dishwasher
KLEENmaid DW6031 Dishwasher
TOMADO TDW5501W Tabletop Dishwasher
FISHER PAYKEL DD24STX6PX1 Tall Sanitize Dishwasher
BUFFALO DK775 Dishwasher
Electrolux EET43200LX Fully Integrated Dishwasher