eurotech ED-ID9P.2 Dishwasher
NOTE:
*AS/NZS 2007.1: This program is the test cycle. The information for comparability
test in accordance with *AS/NZS 2007.1.
Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Open the door, Press the power button.
5. Choose a program, the response light will turn on. Then close the door, the
dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm stop working,
you can open the door completely.
2. Press Program Button more than three seconds the machine will be in stand by
state.
3. You can change the program to the desired cycle setting.
3 sec
13
| General | Details |
|---|---|
| Name | eurotech ED-ID9P.2 Dishwasher |
| Make | eurotech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.51 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Montpellier MDWBID4553 Slimline 45cm Dishwasher
GE APPLIANCES JGP3030DLWW 30 Gas Cooktop with Dishwasher
Westinghouse WSF6606XB Dishwasher
BOSCH SMS2HMW03E Dishwasher
BOSCH 9000706944 Dishwasher
Bosch SMU8ZCS01A Dishwasher
IKEA PROFFSIG Integrated Dishwasher
FISHER PAYKEL HDW13V1S1 Dishwasher
BOSCH SHX78CM4N Dishwasher
AEG FSE76738P Dishwasher