Fisher and Paykel 82085 Door Panels for Dishwasher

1

2

INSTALLATION GUIDE  

ACCESSORY DOOR PANELS FOR DISHWASHER  

IMPORTANT!  

This guide is provided to assist in safely installing this accessory door panel to the dishwasher.  

z

z

For more information, refer to the Installation Guide supplied with your dishwasher.  

Handles are not supplied with this kit and can be purchased separately through an authorised Fisher & Paykel dealer.  

z

ADA DOOR PANEL (82085)  

The selected handle must be fitted to the panel prior to installation onto the product.  

FIX SLIDER BRACKET  

HANG DOOR PANEL  

Top screw detail  

(between panel and screw head)  

3mm  

Close the door of the  

dishwasher and align  

the screws of the  

Fix the slider bracket  

to the panel through  

the lower pilot holes  

accessory panel into  

the lower keyhole of  

the dishwasher door.  

1

2

SECURE DOOR PANEL  

ALIGN DOOR PANEL  

Open the door and remove the  

four screws and replace with  

Ø3.9 x 1 1/2” (38mm) screws to  

fix the panel into place.  

Slide the custom panel up so  

that the top of the door panel is  

flush with the control panel.  

3

4

The panel can only slide  

upwards and can be lifted off  

and reinstalled if required  

CHECK DOOR BALANCE  

z

Check the door balance by opening  

and closing the door.  

Increase  

z

z

If the door drops when released,  

increase the tension.  

5

Decrease  

If the door rises when released,  

decrease the tension.  

595703A 12.19  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Fisher and Paykel 82085 Door Panels for Dishwasher
Make	FISHER and PAYKEL
Language	English
Filetype	PDF (Download)
File size	0.19 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• FISHER and PAYKEL

Fisher and Paykel 82085 Door Panels for Dishwasher Overview

Summary of Contents

• Page 1: Installation guide for accessory door panels for dishwasher. This guide assists in safely installing the accessory door panel to the dishwasher. For more information, refer to the installation guide supplied with your dishwasher. Handles are not supplied with this kit and can be purchased separately. The selected handle must be fitted to the panel prior to installation. Fix the slider bracket to the panel through the lower pilot holes. Open the door and remove the four screws to fix the panel into place. Slide the custom panel up so that the top of the door panel is flush with the control panel. The panel can slide upwards and can be lifted off and reinstalled if required. Check the door balance by opening and closing the door. If the door drops when released, increase the tension; if it rises, decrease the tension.
• Page 2: Installation guide for accessory door panels for dishwasher includes essential steps for installation. An infill bracket must be attached to fill the gap between the dishwasher and cabinet top, except for ADA door panels. The selected handle should be fitted to the panel before installation. Remove two screws from the infill bracket and open the door to remove plastic plugs. Attach the bracket to the top of the appliance without fully tightening it. Align the door panel so that the distance between the top of the door panel and control panel is 1.65 inches (42mm). The panel can slide upwards and can be lifted off and reinstalled if necessary. Push the appliance into the cabinetry, ensuring the infill bracket does not hit the cabinet top. Slide the side wings of the bracket outward to cover the hollow space. Hand tighten the screws for the infill bracket and reinstall the hole plugs.