Miele PFD 102 Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

Installation plan  

PFD 102 i  

PFD 103 SCi  

en-GB  

M.-Nr. 11 882 610  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Miele PFD 102 Dishwasher
Make	Miele
Language	English
Filetype	PDF (Download)
File size	0.29 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Miele

Miele PFD 102 Dishwasher Overview

Summary of Contents

• Page 1: Installation plan PFD 102 i PFD 103 SCi
• Page 2: Installation notes Installation requirements Environmental requirements Electrical connection Water connection Appliance dimensions and installation dimensions Connections on the back of the appliance On-site connections Technical data Operating conditions
• Page 3: Installation notes For safe installation and commissioning of the dishwasher, please read the installation plan, the service documentation, the installation sheet, and the operating instructions. This installation plan includes the dimensions of the appliance, the technical data, and the requirements to be met on site for the installation of the dishwasher. This dishwasher must only be installed and commissioned by the Miele Customer Service Department, a Miele authorised dealer, or a suitably qualified specialist. Installation should only be performed in accordance with valid regulations, relevant standards, and health and safety codes. Condensate can build up in the area surrounding the dishwasher. Any furniture and fittings in the room must therefore be suitable for purpose. The vapour barrier film supplied protects the worktop from damage caused by steam when the door is opened. All work on the electrical connection must be carried out by the Miele Customer Service Department, an authorised Miele dealer, or a qualified electrician. The dishwasher should be connected to the electricity supply via a socket. If the dishwasher is hard-wired to the power supply, a power switch capable of disconnecting the dishwasher at all poles must be installed on site. For increased safety, it is recommended to protect the dishwasher with a residual current device (RCD) with a trip current of 30 mA.
• Page 4: Installation notes The dishwasher must only be connected to fully vented pipework. A brief increase in the water pressure can damage components of the dishwasher. The quality of the incoming water must correspond to the drinking water specification of the country. The dishwasher must be connected to the water supply in accordance with local and national regulations. It can be connected to cold or hot water supplies. The stopcock should remain accessible once the dishwasher has been installed. The dishwasher drain hose should be connected to a separate on-site drainage system. If the hose is to be fitted directly to the drainage system, use the hose clip supplied. Lay the drain hose so that it does not kink and is not subjected to pressure or tension. An external dispensing module for liquid cleaning agents can be connected to the back of the dishwasher.
• Page 5: Appliance dimensions and installation dimensions Appliance dimensions and installation drawings Appliance type Front panel dimensions Length Thickness Weight
• Page 6: Connections on the back of the appliance include various on-site connections. Electrical connection is necessary for the appliance to function. External dispensing requires a power supply connection. Equipotential bonding is important for safety. Waste water management is a key consideration. Cold or hot water connections are required for operation. There is a connection for the dispensing hose sealed with a blind stopper. The dispenser connector is supplied with the dispensing module.
• Page 7: Connections External dispensing Max. delivery head Length of dispenser hose, DOS module to suction lance Length of dispenser hose, back of appliance to DOS module Length of power cable, back of appliance to DOS module Place the container on the floor next to the cleaning machine or in an adjacent cabinet. The container must not be placed on top of or above the cleaning machine.
• Page 8: Technical data Appliance type: PFD 102 i, PFD 103 SCi Dimensions and weights Height: 805 mm, 845 mm Width: 598 mm, 570 mm Depth: 1165 mm, 1205 mm Weight: 65 kg, 65 kg Max. floor load: 1000 N Sound power level: 46 dB(A), 45 dB(A) Sound pressure level in the workplace: 34.1 dB(A), 32.5 dB(A)
• Page 9: Technical data Standard electrical connection PFD 102 i Voltage AC 230V Frequency 50 Hz Fuse rating 32 A Power cable length 1.7 m Power cable cross-section 3x4 mm² Heat output 6.1 kW Total rated load 6.3 kW Max. water temperature 60 °C Max. water hardness 36 °dH
• Page 10: Technical data Max. water temperature: 82 °C Drain hose length: 1.5 m Max. drain hose length: 1 m Max. delivery head: 10 m Max. transient flow rate: 22 l/min Hose inner diameter: 10 mm Operating conditions: Ambient temperature +5 – +40 °C Relative humidity: Up to 31 °C, maximum 80% Max. altitude above sea level: 4000 m Storage and transportation conditions: Ambient temperature -20 – +60 °C
• Page 11: Manufacturer: Miele & Cie. KG Alteration rights reserved / Publication date: 2023-12-01 M.-Nr. 11 882 610 / 03