Home > KitchenAid > Kitchenaid MVWC565FW1 Dishwasher
Kitchenaid MVWC565FW1 Dishwasher
INSTALLATION INSTRUCTIONS
Drill a 1½ (3.8 cm) drain hose hole in the side or rear of cabinet,
"
depending on location of drain hose routing and drain hose
connection location.
WARNING
Drill a 1/2" (1.27 cm) water supply hose hole in the side or rear
of cabinet, depending on location of water supply routing and
connection location
Drill a 1½" (3.8 cm) electrical conduit hole in the right-hand side
or rear of cabinet.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
1. Sand holes smooth
Failure to do so can result in death or electrical shock.
STEP 1:
Metal
Cabinet
Video of installation steps can be found online at whirlpool.com
in the “Service & Support” section “How To’s & FAQ.
Wood
Cabinet
2. Disconnect power
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover edges of hole with grommet included with
power cord kit.
3. Shut off water supply
Shut off the water supply to the dishwasher.
Helpful Tip: Wiring the dishwasher will be easier if you route
the cable into the cabinet opening from the right-hand side.
PREPARE CABINET OPENING—
NEW UTILITIES
INSTALL OPTIONAL MOISTURE BARRIER -
RECOMMENDED FOR WOOD COUNTERTOPS
Moisture barrier/wood shims
4. Drill hole locations—new construction
Moisture
barrier
Optional
location
Preferred
location
1½"
(3.8 cm)
1/2"
(1.27 cm)
Install
wood
shims
The power-supply receptacle for the appliance shall be installed
in a cabinet or on a wall adjacent to the undercounter space in
which the appliance is to be installed.
Make sure the area under the cabinet is clean and dry for
installation of the moisture barrier. Remove the backing of the
moisture barrier, and apply to underside of the countertop along
the front edge of the counter.
NOTE: The use of this moisture barrier is recommended but not
required.
NOTE: Install wood shims if side anchoring and the gap between
the sides of the cabinet and sides of the dishwasher are greater
than 1/2" (1.27 cm) on each side or are greater than the length of
the side anchor screws.
NOTE: Refer to the “Product and Cabinet Opening Dimensions”
section for the correct hole placement and dimensions of the
shaded area.
13
| General | Details |
|---|---|
| Name | Kitchenaid MVWC565FW1 Dishwasher |
| Make | KitchenAid |
| Language | English |
| Filetype | PDF (Download) |
| File size | 11.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
KitchenAid KDTF324PPA Dishwasher
KitchenAid w11323304 Dishwasher
KitchenAid KDFE104KWH Two Rack Dishwasher
KitchenAid KDTE104KPS Dishwasher
KitchenAid KDFE104KBL Front Dishwasher
KitchenAid KDTF924PPS Flush Cabinet Dishwasher
KitchenAid KDTE304RBS Level Jet Rack Dishwasher
KitchenAid KDF Series Dishwasher
KitchenAid W11589937B Dishwasher
FISHER AND PAYKEL DD24DHTI9N Dishwasher
FISHER AND PAYKEL DD60SCX9 Dish Drawer Dishwasher
FISHER PAYKEL DD60DDFX9 Double Sanitise DishDrawer Dishwasher
ELVITA CDM6605X Dishwasher
BOSCH SMI4ECS28E Dishwasher
FISHER PAYKEL DD60ST4NX9 Built-Under Dishwasher
SIEMENS SN65ZX00AE Dishwasher
BOSCH SHE53C85SS 300 Series Dishwasher
GAGGENAU DF481100F 400 Series Dishwasher
Whirlpool W2IHKD526A Fully Integrated Dishwasher