Home > Montpellier > Montpellier MDWBID4553 Slimline 45cm Dishwasher
Montpellier MDWBID4553 Slimline 45cm Dishwasher
The Control Panel
7.1 Select a Programme
NOTE: Do not open the door before the programme
is complete.
Follow the steps below to select a programme.
Turn the machine on using the On/Off button.
TE: If the door of the machine is opened or the
wer is cut off while a programme is in operation,
the programme will continue when the door is closed
or the power returns.
Select a programme using the Programme
Selection button. Press repeatedly until the
desired programme is illuminated.
TE: If the power is cut or the machine door is
ened during the drying process, the programme
will terminate. Your machine will now be ready for a
new programme selection.
If desired select an appropriate programme
option with the Option button.
Close the door to begin cycle.
Buzzer Sound Control
7.2 Changing a Programme
To change the buzzer sound level, follow the
below steps:
Follow the steps below to change a programme while in
operation.
1. Open the door and press Programme and Option (3)
Open the door and select a new programme
using the Programme Selection button.
buttons simultaneously for 3 seconds.
2. When sound setting is recognise buzzer gives a
long sound and machine will display last set level,
from “S0” to “S3”.
After closing the door, the new programme will resume
the course of the old programme.
NOTE: Open the door slightly at first to stop a
programme before it is complete in order to avoid
water spillage.
3. To decrease sound level press Programme (2) button.
To increase sound level, press Option (3) button.
7.3 Cancelling a Programme
4. When voice level is chang corresponding LED’s
Follow the steps below to cancel a programme while
in operation.
shown below table illuminate.
LED’s
Voice Levels
When the door of your machine is opened,
the light corresponding to the most recently
selected programme will illuminate.
Energy
1/2
3h
6h
X
Save
S0
S1
S2
S3
Press and hold the Programme Selection
button for 3 seconds. The End Of Programme
Indicator will flash and the programme light will
switch off.
X
X
X
X
X
X
X
X
X
The water discharge process will start after the
door of the machine is closed and will continue
for 30 seconds. A buz zer will sound 5 times
when a programme is cancelled and the End
Of Programme Indicator will illuminate.
5. To save the selected sound level, turn off the
machine. ’’S0’’ level means all voices are off.
Factory setting is “S3.
7.4 Switching the Machine Off
The End Of Programme Indicator will illuminate
when a programme is complete. A signal will also
sound 5 times. You can then switch your machine
off using the Power On/Off button.
Disconnect the plug and turn off the water tap.
18
| General | Details |
|---|---|
| Name | Montpellier MDWBID4553 Slimline 45cm Dishwasher |
| Make | Montpellier |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.89 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Montpellier MDWBID6053 Dishwasher
MDI450 Montpellier Dishwasher
Montpellier MAB1353DC Retro Dishwasher
Hotpoint A1385707 Dishwasher
SIEMENS SN23EC03AE Free Standing Dishwasher
FISHER PAYKEL DD24SCTX9N Sanitize Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
AEG FFB93807PM Dishwasher
FISHER PAYKEL DD24DCTX9 N Double Dishwasher
FISHER PAYKEL DD24SI9N Sanitize Integrated Single DishDrawer Dishwasher
Whirlpool 2B19 Dishwasher
SIEMENS SN73HX10VG Fully Integrated Dishwasher
HIGH ONE W701T Dishwasher