Home > Montpellier > Montpellier MDWBID6053 Dishwasher
Montpellier MDWBID6053 Dishwasher
Before Using Your Appliance
3.2 Technical Specification
Use softener salt specifically produced for use in
dishwashers.
Capacity
13 place settings
When you start your dishwasher, the salt compartment
is filled with water, therefore put the softener salt in
prior to starting your machine (see below for filling
instructions).
Dimensions (mm)
Height
Width
820-870
598
550
Depth
If the softener salt has overflowed and you do not
start the machine immediately, run a short washing
programme to protect your machine against corrosion.
Operating voltage/frequency
Total current
220-240V 50Hz
10A
Total power
1900W
4.3 Fill The Salt
Maximum 1Mpa
Minimum 0.03Mpa
To add softener salt,
Water supply pressure
(1) Open the salt compartment cap by turning it counter
4 Before Using the Appliance
clockwise.
4.1 Preparing Your Dishwasher For First Use
(2) Remove salt cap.
•
Make sure the electricity and supply water
specifications match the values indicated in
the installation instructions for the machine.
(3) Before first use, fill the compartment with 1Kg salt.
If available, using a funnel will make filling easier.
(4) Fill the container with water until it is almost
overflowing. Replace the cap making sure it is
secure and tight.
•
•
•
Remove all packaging material inside the machine.
Set the water softener level, after filling with salt.
After every 20-30 Cycles, or when the re-fill light
indicates, add salt into your machine until it fills
up the container (approx. 1Kg).
Set the rinse-aid level, after filling the rinse-aid
compartment.
4.2 Salt Usage
For a good washing function, the dishwasher needs
soft, i.e. less calcareous water. Otherwise, White lime
residues will remain on the dishes and the interior
equipment. This will negatively affect your machine’s
washing, drying and shining performance. When water
flows through the softener system, the ions forming
the hardness are removed from the water and the
water reaches the softness required to obtain the
best washing result. Depending on the level of
hardness of the inflowing water, these ions that
harden the water accumulate rapidly inside the
softener system. Therefore, the softener system
has to be refreshed so that it operates with the
same performance during every wash. For this
purpose, dishwasher salt is used. The dishwasher
can only use special dishwasher salt to soften the
water. Do not use any small grained or powdered type
of salts which are easily soluble (for example table salt).
Using any other type of salt can damage your machine
and will invalidate your guarantee.
1
2
3
4
Only add water to the salt compartment before
first use.
9
| General | Details |
|---|---|
| Name | Montpellier MDWBID6053 Dishwasher |
| Make | Montpellier |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.89 MB |
(1 votes, average: 5.00 out of 5)
Loading...
MDI450 Montpellier Dishwasher
Montpellier MDWBID4553 Slimline 45cm Dishwasher
Montpellier MAB1353DC Retro Dishwasher
CMA DISHMACHINES CMA-180 Dishwasher
BOSCH SPI6ZDS006 Dishwasher
Miele G7788SCViXXL Dishwasher
BOSCH SHV 6800 Dishwasher
Fisher Paykel DW60UT4I2 Built Under Dishwasher
BOSCH SPI4ELS01D Dishwasher
AEG GS60AIM Dishwasher
Electrolux KESC7325L Dishwasher
LG LDTH797 Series Smart Dishwasher
ASKO DFI777UXXL Dishwasher