Home > Pelgrim > Pelgrim GVW250XL Dishwasher

Pelgrim GVW250XL Dishwasher

Settings  
Open the door and press  
To open the dishwasher's settings menu, press and hold  
Use to step through the menu.  
.
and  
until SEt is shown on the display.  
Open the dishwasher's settings menu  
Select alternative  
Confirm / Next setting  
To exit the menu, step through it or press  
.
Settings  
Alternatives  
2
Sounds  
2:00 - 2:03  
A beep confirms that the control panel has been pressed.  
A beep indicates when a dishwashing program has  
ended.  
Error messages are always indicated by a loud buzzer.  
3
Rinse aid  
3:00 - 3:05  
Setting for rinse aid dosage. The rinse aid dispenser can  
be adjusted between 00 (Off) and 05 (High dosage).  
Increase the rinse aid dosage:  
If the dishes have water marks.  
Decrease the rinse aid dosage:  
If the dishes have a sticky white/blue film.  
If the dishes are streaked.  
Build-up of foam. If you have very soft water, the  
rinse aid can be diluted 50:50 with water.  
Pre-selected at factory: 04  
4
Water hardness  
4:00 - 4:09  
Adjusting the water softener. Select a setting depending  
on the hardness of the water supply. It is important that  
this setting is correct!  
See Water hardness in the chapter Before washing for  
the first time.  
For a water supply with a hardness below 6°dH (10°fH /  
7°eH / 1.0 mmol/l), select 00. The water softener is deac-  
tivated and no salt needs to be added.  
Pre-selected at factory: 04  
5
TAB  
5:00 (Off)  
5:01 (On)  
Activate this setting when using an all-in-one detergent  
that contains rinse aid.  
20  
GeneralDetails
NamePelgrim GVW250XL Dishwasher
MakePelgrim
LanguageEnglish
FiletypePDF (Download)
File size1.99 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Pelgrim GVW200L Dishwasher
Pelgrim GVW200L Dishwasher

Pelgrim GVW250XL Dishwasher