Privileg RSBC 3M19 Dishwasher
EN
Quick Guide
Please scan the QR code on your product in order to have more detailed information.
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.
PUSH&GO - Push&GO button is an easily distinguishable button that
allows you direct access to the Push&GO program, a wash and dry
cycle that ensures great cleaning performance in a short time.You don’t have
to worry which program to choose, Push&GO cycle will do the work for you.
OPERATION INDICATOR - A LED light projected on the floor indicates
that the dishwasher is working. One of the following operating modes
can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds, stays off during
the cycle and flashes at the end of the cycle.
c) The light stays on during the cycle and flashes at the end of the cycle
(default mode).
DELAY -The start of the program may be delayed for a period of time
between 1 and 12 hours.
TheDELAYfunctioncannotbesetonceawashcyclehasbeenstarted.
TABLET (Tab)- If you use powder or liquid detergent, this option
should be off.
Auto Door is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying
performance every day. Door opens at the temperature that is safe to
your kitchen furniture.
CAPACITY: 14 standard place-settings
LOADING THE RACKS
Foldable
flaps with
adjustable
position
CUTLERY RACK
UPPER RACK
LOWER RACK
For pots, lids, plates, salad
bowls, cutlery etc. Large plates
and lids should ideally be
placed at the sides to avoid in-
terferences with the spray arm.
The lower rack has tip-up sup-
ports which can be used in a
vertical position when arrang-
ing plates or in a horizontal po-
sition (lower) to load pans and
salad bowls easily.
(loading example for the cutlery rack) (loading example for the upper rack)
(loading example for
the lower rack)
The third rack was designed to Load delicate and light dishes: glass-
house the cutlery.
es, cups, saucers, low salad bowls.
More information in the Daily Reference Guide on website.
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
CLEANING THE SPRAY ARMS
B
A
A
C
To remove the upper spray arm, The lower spray arm may be re-
turn the plastic locking ring in a moved by pulling it upwards.
clockwise direction.
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
Please scan the QR code on your product in order to have more detailed information.
TROUBLESHOOTING
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS
POSSIBLE CAUSES
SOLUTIONS
No water in the water supply or the tap is closed. Make sure there is water in the water supply or the tap running.
The dishwasher does not
fill the water.
Display shows: H,
6 and On/Off LED is
blinking rapidly
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and
reboot.
The inlet hose is bent.
The sieve in the water inlet hose is clogged; it is After having carried out the verification and cleaning, turn off and turn on the dishwasher
necessary to clean it and restart a new program.
Dishwasher finishes the
cycle prematurely.
Display shows: 15 and On/
Drain hose positioned too low or siphoning into Check if end of drain hose is placed at correct height (see INSTALLATION).Check for sipho-
home sewage system.
ning into home sewage system, install air admittance valve if necessary.
Off LED is blinking rapidly Air in water supply.
Check water supply for leaks or other issues letting air inside.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
•
•
•
Using QR code on your product.
Visiting our website docs.privileg.eu and parts-selfservice.europeanappliances.com
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product‘s identification plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
IEC 436
:
2
| General | Details |
|---|---|
| Name | Privileg RSBC 3M19 Dishwasher |
| Make | Privileg |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.42 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Privileg 542300 Dishwasher
FISHER AND PAYKEL DD60DTX6I1 Dishwasher
FISHER AND PAYKEL DD24STX6PX1 Dish Drawer Dishwasher
RAZORRI Comodo CDW04A Countertop Dishwasher Machine
ELVITA CBD6603V Dishwasher
GE APPLIANCES JGP3030DLWW 30 Gas Cooktop with Dishwasher
BOSCH SMH4HCX48E Dishwasher
whirlpool LDV02284 Dishwasher
FISHER AND PAYKEL DW60FC2W1 Dishwasher
BOSCH SMD6TCX00E Dishwasher
GE Profile PDT795SYV UltraFresh System Dishwasher