Home > Privileg > Privileg RSBC 3M19 Dishwasher

Privileg RSBC 3M19 Dishwasher

4

Quick Guide

THANK YOU FOR BUYING AN PRIVILEG PRODUCT.

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

Before using the appliance carefully read the Safety Instruction.

CONTROL PANEL

1. On-Oﬀ/Reset button with indicator 6. Tablet (Tab) indicator light

light

7. Display

8. Push & Go button

9. Delay button

10. Start/Pause button with

indicator light/ Tablet (Tab)

2. Program selection button

3. Salt reﬁll indicator light

4. Rinse Aid reﬁll indicator light

5. Program number and delay time

indicator

3 4

FIRST TIME USE

FILLING THE SALT RESERVOIR

FILLING THE DETERGENT DISPENSER

The use of salt prevents the formation of LIMESCALE on the dishes and on To open the detergent dispenser use the opening device C. Introduce the

the machine’s functional components.

detergent into the dry dispenser D only. Place the amount of detergent for

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

•

It is mandatory that the salt reservoir never be empty.

It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be because it adjusts the program so that the best washing and drying results

ﬁlled when the SALT REFILL indicator light in the control panel is lit.

are always achieved.

1. Remove the lower rack and unscrew the reservoir cap Usage of detergent not designed for dishwashers may cause malfunc-

(anticlockwise).

tion or damage to the appliance.

2. Position the funnel (see ﬁgure) and ﬁll the salt reservoir

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

3. Only the ﬁrst time you do this: ﬁll the salt reservoir

with water.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently pre-

venting scale buildup on heater, contributing also to better cleaning eﬃ-

ciency. This system regenerates itself with salt, therefore it is required

to reﬁll salt container when empty.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into the

container during the wash program (this could damage the water softener be-

yond repair). Whenever you need to add salt, it is mandatory to complete the

procedure before the beginning of the washing cycle to avoid corrosion.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in ﬁnal rinse and ﬁnishes in drying phase, be-

fore cycle ends.

•

Single regeneration consumes: ~3.5L of water;

Takes up to 5 additional minutes for the cycle;

Consumes below 0.005kWh of energy.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse

aid dispenser A should be ﬁlled when the RINSE

AID REFILL indicator light in the control pan-

el is lit. NEVER pour the rinse aid directly into the

appliance tub.

PROGRAMS TABLE

Duration

Water

Energy

Available

options ^*)

of wash

program

(h:min)^**)

Program

Programs description

consumption consumption

(litres/cycle) (kWh/cycle)

Eco 50°- Eco program is suitable to clean normally soiled tableware,

that for this use, it is the most eﬃcient program in terms of its com-

bined energy and water consumption, and that it is used to assess

compliance with the EU Ecodesign legislation.

3:20

9.5

0.64

Auto Intensive 65° - Automatic program for heavily soiled dishes and

2:00 - 3:10

1:30 - 2:30

1:40

14.0 - 17.0

14.5 - 16.0

12.0

1.50 - 1.85

1.15 - 1.30

1.20

pans (not to be used for delicate items).

Auto Mixed 55° - Automatic program for normally soiled pans and dishes.

Glass 45° - Program for delicate items, which are more sensitive to

high temperatures, for example glasses and cups.

Fast&Clean 28’ 45° - Program to be used for half load of lightly-soiled

dishes with no dried food residues. Does not have drying phase.