Home > reg > reg 10789234 Dishwasher

reg 10789234 Dishwasher

Changing a Programme  
Switching the Machine Off  
Follow the steps below to change a  
programme while in operation.  
"00" will be shown on the displaywhen a  
programme is complete. A signal will also  
sound 5 times. You can then switch your  
machine off using the Power On/Off button.  
Open the door and press the  
Programme Selection button to  
select a new programme.  
Disconnect the plug and turn  
off the water tap.  
After closing the door, the new  
programme will resume the  
course of the old programme.  
NOTE: If any button is not pressed  
on the ready state, the machine turns off  
automatically after 15 minutes.  
NOTE: Open the door slightly at first to  
stop a programme before it is complete in  
order to avoid water spillage.  
NOTE: Do not open the door before a  
programme is complete.  
Cancelling a Programme  
Follow the steps below to cancel a  
programme while in operation.  
NOTE: Leave the door slightly open at  
the end of a wash programme to speed up  
drying.  
NOTE: If the door of the machine  
is opened or the power is cut during  
operation, the program will continue when  
the door is closed or the power returns.  
When the door of your machine  
is opened, the most recently  
selected programme will show on  
the display.  
Buzzer Sound Control  
To change the buzzer sound level,  
follow the below steps:  
1. Open the door and press Delay (5)  
And Options (6) buttons simultaneously  
for 3 seconds.  
Press and hold the Programme  
Selection button for 3 seconds. '1' will  
be shown on the Display.  
2. When sound setting is recognized,  
The water discharge process will start after the  
door of the machine is closed and will continue  
for 30 seconds. A buzzer will sound 5 times  
when a programme is cancelled.  
buzzer gives a long sound and machine will  
display last set level, from “S0” to “S3”.  
3. To decrease sound level press Delay  
button (5). To increase sound level, press  
Options button (6).  
4. To save the selected sound level, turn off  
the machine.’’S0’’ level means all voices are  
off. Factory setting is “S3”.  
Save Power Mode  
To activate or deactivate Save Power Mode,  
follow the below steps:  
1. Open the door and press Half Load (4)  
and Delay (5) buttons simultaneously for 3  
seconds.  
EN - 21  
GeneralDetails
Namereg 10789234 Dishwasher
Makereg
LanguageEnglish
FiletypePDF (Download)
File size1.83 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

reg 10789234 Dishwasher