rhima RU-50 Under Bench Dishwasher

1

OPERATING INSTRUCTIONS RU-50  

Use only non-foaming, non-chlorinated  

detergents suitable for automatic dishwashers  

such as Rhima’s range of detergents  

1 7 4  

6

5

2

(1) ON/OFF/STAND-BY  

Ensure clear hose is inserted into the  

detergent bottle & green hose is inserted into  

rinse additive bottle  

(2) Push button to start cycle  

(3) Push to drain (optional)  

(4) Tank temperature display  

(5) Boiler temperature display  

(6) Cycle indicator  

(7) Tank filling/draining indicator  

(8) Filling indicator  

1 2 3 4  

!

For best performance connect machine to  

HOT water  

(9) Draining indicator  

(10) STAND-BY indicator  

(11) Cycle scroll bar  

If pre-soaking do not use regular dishwashing  

liquid as significant foaming may result during  

the wash cycle  

8

9 10  

11  

12  

3

(12) Set temperature indicator  

Operating the machine  

Draining the machine  

Self Clean Cycle & Regular Maintenance  

INTIAL FILL AND HEATING  

1. To maintain good wash results, the dishwasher should be drained and  

refilled every 2-4 hours depending on frequency of use and level of  

soil/residue on items being washed. At the end of the day, the dishwasher  

should be drained, switched off and the door left open to ventilate  

SELF CLEAN CYCLE  

1 2 3 4  

1. Close the door and press the ON/OFF  

switch (1)  

1. To run the SELF-CLEAN cycle, press and hold the START button (2) for 5  

seconds and the SELF-CLEAN cycle will start automatically  

!

2. Machine is ready for use when the  

TEMPERATURE REACHED INDICATOR (12)  

Illuminates  

2. Leave the machine switched on. Open the door and remove the  

OVERFLOW PIPE (A) Fig. 2  

2. On completion, drain the machine by following machine draining  

instructions  

FIG. 1  

DO NOT REMOVE THE GREY PLASTIC FILTERS (B) FIG. 2. THESE PREVENT  

SCRAPS OF FOOD GOING DOWN INTO THE DRAIN PUMP.  

Blocked drain pumps are not covered by warranty  

REGULAR MAINTENANCE  

3. The WASH TANK (4) and BOILER (5) temperature  

indicators display the wash tank and boiler  

temperatures respectively  

1. Remove the fixing screw (D) Fig. 3 to remove the wash/rinse arms. Check  

that the nozzles (E) Fig. 3 are not blocked with food waste. The nozzles can  

be removed for cleaning if required  

3. Press and hold the DRAIN PUMP  

button (3) for 1 second  

DISHWASHER OPERATION  

ꢀ

4. The dishwasher will automatically  

empty the wash tank and enter  

1. Load the rack with plates/cups/glasses ensuring items do not overlap  

2. Reinstall the wash/rinse  

arms using fixing screw (D)  

Fig. 3.  

ꢄ

ꢂ

2. Close the door and start the wash cycle by pushing and holding the  

START button (2) for 1 second.  

Note: The 4 wash prgrams (6) can be scrolled through by pressing &  

holding the START button (2). When the desired program is selected release  

the START button (2)  

standby mode  

Loosen  

Tighten  

Clockwise  

AnƟ-clockwise  

Tighten  

Clockwise  

5. Remove grey plastic PUMP FILTER (B)  

Fig. 2 and wash under running water  

and refit the filter and OVERFLOW PIPE  

Loosen  

AnƟ-clockwise  

(A) Fig. 2  

ꢁ

3. The wash cycle will begin, and the progress will be indicated on the  

CYCLE SCROLL BAR (11)  

FIG. 2  

ꢃ

4. When cycle is finished the START button (2) will flash  

FIG.3  

5. The washed items will air-dry within a few minutes of being removed  

from the dishwasher. The use of rinse additive will improve drying times  

Rhima Australia Pty Ltd  

72-74 Woodlands Drive Braeside 3195  

Tel: 03 8586 5444 Fax: 03 8586 5454  

Rhima New Zealand Ltd  

Unit 7, 13 Beatrice Tinsley Crescent  

Albany Auckland 0632 New Zealand  

Tel: 09 414 5575  

Rhima Singapore Pte Ltd  

10 Tampines North Drive 4 #05-09  

JTC Space @ Tampines North Singapore 528553  

Tel: +65 9107 8943  

www.rhima.com.au  

WMTS-101  

WM-022203  

Quality  

ISO 9001  

www.rhima.co.nz  

www.rhima.sg  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	rhima RU-50 Under Bench Dishwasher
Make	rhima
Language	English
Filetype	PDF (Download)
File size	0.51 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• rhima

rhima RU-50 Under Bench Dishwasher Overview

Summary of Contents

• Page 1: Operating instructions for RU-50 include using non-foaming, non-chlorinated detergents suitable for automatic dishwashers. Ensure clear hose is inserted into the detergent bottle and green hose is inserted into rinse additive bottle. Push button to start the cycle and push to drain if needed. The dishwasher should be drained and refilled every 2-4 hours based on usage. At the end of the day, drain the dishwasher, switch it off, and leave the door open for ventilation. To run the self-clean cycle, press and hold the start button for 5 seconds. The machine is ready for use when the temperature reached indicator illuminates. Regular maintenance includes checking that the nozzles are not blocked with food waste. Load the rack with plates and glasses ensuring items do not overlap. The washed items will air-dry within a few minutes of being removed from the dishwasher.