SIEMENS SN23EC03AE Free Standing Dishwasher

1

2

en  

Before using for the first time, read the instruction manual and the safety information it contains.  

Setting up Home Connect  

Overview of water hardness settings  

Setting the water softening sys-  

tem  

Programmes  

You can find an overview of the  

water hardness values that can  

be selected here.  

A table of country-specific units  

can be found in the instruction  

manual.  

The programme data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the programme and additional func-  

tion selected.  

The running time will change if the  

rinse aid system is switched off or  

rinse aid needs to be added.  

Medium  

Medium  

Medium  

Hard  

Hard  

Hard  

1.5 - 1.8  

1.9 - 2.1  

2.2 - 2.9  

3.0 - 3.7  

3.8 - 5.4  

5.5 - 8.9  

H02  

H03  

H04  

H05  

H06  

H07  

Tip: Connect your appliance to a mobile device. You can con-  

veniently change all settings using the Home Connect app.  

1. Press  

.

2. To open the basic settings, press  

for 3 seconds.  

a The display shows Hxx.  

1. Install the Home Connect app on your mobile device and fol-  

low the instructions.  

2. Scan the QR code with the Home Connect  

app.  

a The display shows  

.

3. Press  

repeatedly until the right  

Hardness mmol/l  

range  

Setting  

value  

water hardness has been set.  

4. To save the settings, press  

for 3 seconds.  

Soft  

Soft  

0 - 1.1  

1.2 - 1.4  

H00  

H01  

Programme  

1) Duration [h:min]  

2) Energy consump-  

tion [kWh]  

3) Water [l]  

1) 2:05 - 2:15  

2) 1.300 - 1.400  

3) 11.5 - 13.5  

1) 1:40 - 2:45  

2) 0.900 - 1.500  

3) 7.0 - 15.5  

1) 3:35  

Intensive 70°  

Auto 45-65°  

Eco 50°  

Adding special salt  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

2) 0.635  

3) 9.0  

1) 1:35 - 1:40  

2) 0.800 - 0.850  

3) 12.0 - 14.0  

1) 1:00  

2) 1.300  

3) 10.5  

Glass 40°  

4. Place the lid back on the dispenser and turn to  

close.  

Speed 65°  

Machine Care  

Favourite  

1) 2:10  

2) 1.350  

Adding rinse aid  

3) 15.2  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

1) 0:15 - 0:15  

2) 0.050 - 0.050  

3) 4.0 - 4.0  

of the dispenser for rinse  

2

aid  

and lift  

.

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 ml  

25 ml  

15 ml  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 4 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	SIEMENS SN23EC03AE Free Standing Dishwasher
Make	SIEMENS
Language	English
Filetype	PDF (Download)
File size	0.44 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• SIEMENS

SIEMENS SN23EC03AE Free Standing Dishwasher Overview

Summary of Contents

• Page 1: Before using for the first time, read the instruction manual and the safety information it contains. Overview of water hardness settings. You can find an overview of the water hardness values that can be selected here. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and scoop out any water. Clean the filter elements under running water. Re-assemble the filter system and insert it into the appliance. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages. Insert the lower spray arm and upper spray arm securely. Troubleshooting E:32-00 indicates a kinked supply hose. E:61-02 indicates a blocked wastewater pump. Rust spots on cutlery may be due to insufficient rust resistance. Filters may be soiled or blocked, requiring cleaning. Remnants of food on tableware can lead to poor cleaning results. Spray arm rotation may be blocked by tableware. All LEDs lighting up indicates a detected fault in the electronics. Select a more intensive washing programme if the current one is too weak.