TEKNIX TBD606 Dishwasher
Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Open the door, press the power button.
5. Choose a program, the response light will turn on. Then close the door, the
dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm stop working,
you can open the door completely.
2. Press the Program button for more than 3 seconds, the dishwasher will enter
standby mode.
3. You can change the program to the desired cycle setting.
3 sec
15
| General | Details |
|---|---|
| Name | TEKNIX TBD606 Dishwasher |
| Make | TEKNIX |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.2 MB |
(1 votes, average: 5.00 out of 5)
Loading...
TEKNIX TFD455W Dishwasher
FISHER PAYKEL DD24ST4NX9 Drawer TM Dishwasher
Electrolux TAPPAN Dishwasher
Amana ADB1400PY Undercounter Dishwasher
Miele PFD 101 U Built Under Dishwasher
INDESIT D2I HL326 Full Size Dishwasher
Bosch SMS4ETW02E Dishwasher
BOSCH GV 64x Voll-I Dishwasher
FISHER PAYKEL DD24SCTB9_N Single DishDrawer Dishwasher
BOSCH SMU4HTW02H Dishwasher
Electrolux LSV48400L Dishwasher