Blomberg LDV42320 Dishwasher
Adjusting the amount of rinse
aid
The machine will remain silent in
pause mode for some time in order to
remove the water from the machine
and on the dishes completely and to
have the water softener cleaned, and
then it will resume running in drying
mode.
1. After turning on the machine,
press Time Delay and P+/P keys
simultaneously. After the countdown
(3, 2, 1) is displayed keep the keys
pressed for a while.
2. Press P+/P to move to position (P) on
the display.
Cancelling the programme
Open the door of the product Press
and hold the Programme Selection /
Programme Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process complete.
Draining is completed in 2 minutes and the
machine gives an audible warning when it
is completed.
3. Set to the appropriate level with the
Time Delay key.
4. Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash
position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in P:2
There might be residues of detergent
or rinse aid in the machine and/or on
the pieces being washed depending
on the step the programme you have
cancelled was in.
position.
3 doses of rinse aid are dispensed in P:3
position.
4 doses of rinse aid are dispensed in P:4
position.
End of programme
Salt indicator (
)
When the programme you have
selected comes to an end, an audible
warning signal will warn you to turn off
your machine. This audible signal will
warn you with certain intervals before it
turns off.
Please check the salt indicator on the
display to see whether there is adequate
amount of softening salt in the dishwasher
or not. You need to refill the salt reservoir
with salt whenever salt indicator appears
on the display of your machine.
Adjusting the water hardness level is
explained in Water Softening System
section.
End of Programme indicator will light up
when the washing programme is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
Rinse Aid indicator ( )
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid indicator
appears on the display of your machine.
3. Close the tap.
4. Unplug the machine from the socket.
For energy saving, the machine is
automatically turned off following the
completion of the programme or if the
programme is not started.
31/EN
| General | Details |
|---|---|
| Name | Blomberg LDV42320 Dishwasher |
| Make | Blomberg |
| Language | English |
| Filetype | PDF (Download) |
| File size | 10.26 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HEINNER HDW-BI6006IE++ Free Standing Dishwasher
BOSCH SMS2IVI61E Dishwasher
GE Monogram UDT165SIVII 18 Inch Dishwasher
LG DFB-425FP Dishwasher
COMFEE CDC22P1ABB Countertop Dishwasher
FISHER PAYKEL DD24DDFTB9 N Sanitize Dishwasher
LG LD-2130-1-W-S-M-H Dishwasher
BOSCH SMV2HVX02E Dishwasher
GERMAN DWH-121 Dishwasher
BOSCH SHP78CM4N Pocket Handle Dishwasher