BOSCH SHV4AEB3N Dishwasher
en-usꢀBefore you begin
Parts
2.5ꢀElectrical Requirements
Elbow connection with 3/4"
female hose threads on one end
fits your water supply line on the
other.
Ensure that the following electrical requirements are met.
Dishwasher electrical rating
Volts
120
Water inlet hose - minimum 3/8"
outer diameter copper tubing or
metal braided dishwasher supply
line.
* Both the elbow and the water
inlet hose can be found in the
dishwasher supply kit
Hertz
60
Amperes
Watts
12
1,440 (max)
Electrical Supply
The customer has the responsibility of ensuring that the
dishwasher electrical installation is in compliance with all
national and local electrical codes and ordinances. The
dishwasher is designed for an electrical supply of 120V,
60 Hz, AC, connected to a dishwasher-dedicated, properly
grounded electrical circuit with a fuse or breaker rated 15
or 20 amps.
SMZSH1ABUC.
Shut-off valve and fittings
appropriate for hot water supply
line.
2.4ꢀPre-install Checklist
2.6ꢀCabinet Requirements
Ensure that the following requirements are met when
planning the installation of your appliance.
Ensure that the cabinet space for the installation meets
the required dimensions.
WARNING
Avoid Scalding or Electric Shock Hazard
▶ Make sure the water supply and electrical supply are
shut off before installation or service.
▶ Do not allow the electrical and supply lines to touch.
¡ Select a location as close to the sink as possible for
easy access to water supply and drain lines.
¡ Be sure the unit is installed close enough to the sink so
the drain hose length does not exceed 92" (2337 mm)
and so that a portion of the drain hose is raised at least
33" above the floor level.
¡ Ensure that the enclosure is square and the opening is
at least 34" ( 863.3 mm) high and 24" (609.6 mm) wide.
¡ Check that the opening in the cabinet is large enough
for routing the electric cable, water line, and drain hose,
and if not, create a new opening. See
¡ If the opening is wood, be sure it is sanded smooth. If it
is metal, be sure it is covered by a protective gasket.
¡ Be sure that your water heater set at 120° F (49° C)
and the water pressure measures at 15-145 psi (1-10
bar)
If the dishwasher is to be installed in a corner, ensure that
there is adequate clearance to open the door as shown.
¡ Determine the mounting method based on the
dishwasher model and counter-top type. See
¡ Only use the included hardware for the installation. If
you are replacing a dishwasher, dispose of old hose
and other equipment properly.
¡ To avoid scratching the floor, have floor protection
ready for when the dishwasher will be slid into the
cabinet.
6
| General | Details |
|---|---|
| Name | BOSCH SHV4AEB3N Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.3 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher
BOSCH SMV4HTX27G Dishwasher
BOSCH SMV4HCX48E Dishwasher
BOSCH SBD6YCX02E-46 Dishwasher
BOSCH SMS26AW08G Dishwasher
Inventum IVW6021A Dishwasher
BOSCH SMS4IKI51T Dishwasher
GE APPLIANCES PDP715SYNFS Dishwasher
epoq EDW60A42W23 Dishwasher
BERTAZZONI DW24T3IXT Dishwasher
FISHER AND PAYKEL DD24DTX6PX1 Dishwasher
BOSCH SMS6ZCW48E Dishwasher
BOSCH SMS2HMW03E Dishwasher