BOSCH SHXM4AY55N Dishwasher
ADD RINSE AID
MAINTENANCE TIPS
Clean surfaces with damp cloth and mild soap.
This dishwasher is designed to be used
with rinse aid, which enhances drying
results and shine.
NOTICE: Do not use abrasives or bleach based cleaners. Do not use stainless
steel cleaner on black stainless or anti-finger print surfaces.
Clean the filter 3-12 times a year, depending on usage.
Tip: Remove lid of the bottle for easier
pouring and avoid the air vent.
1. Unscrew the Large Object Trap as illustrated and remove the entire filter
system.
max
air
vent
2. Remove the micro-filter from the fine filter, rinse the filters under running
water clean with a soft brush.
The amount of rinse aid dispensed can be
adjusted in the settings. Only change the
setting if streaks remain on the dishes (lower the amount), or if dishes are not
getting dry enough (increase the amount).
3. Reinstall the filter system in reverse sequence, align arrows.
2
Setting
Factory setting Description
d-Intensive drying
d:00-d:01
d:00/ off
Improved drying for glasses and
plastic, by increasing the tempera-
ture and length.
1
r-Rinse Aid
r:00-r:06
r:05
Dispenses the amount of rinse aid,
which affects drying (see above).
b-Beep at cycle end b:02
b:00-b:03
Adjust the sound level of the signal
beep at the end of the cycle. Or turn
off (b:00).
FREQUENTLY ASKED QUESTIONS
Q: Why is food left on dishes?
I :01/ on
Light projected on the floor to signal
active wash cycle. Set to on or off.
I -Infolight®
I:00-I:01
A: It is possible the dishes do not have adequate clearance between them.
Also, be sure nothing is blocking spray arm and that the filter is clean. Select an
intensive cleaning cycle.
P-Auto power off
P:00-P:02
P:00/ unit does
not shut off
automatically
Unit turns itself off after cycle is
complete, either after 1 minute, P:01
or after 2 hours, P:02.
Q: Why does the cycle run a long time?
rE-Factory reset
rE
Restores the factory settings on the
dishwasher.
A: 1. Sensors in the dishwasher automatically increase the cycle time to ensure a
good wash when heavy soil is detected.
2. Incoming water may not be hot enough and dishwasher has to heat it.
Q: Why is E:XX (X can be any number) displayed?
ADJUSTING THE SETTINGS
1. Press the On/Off button. Hold down button A (see pages 6-7) and press
A: This is an error code. For example, E:22 indicates there is water in the sump
because the filter is blocked or needs cleaning. See the Use and Care Manual
for a list of error codes.
Start until the display shows d:0x (x can be any number).
2. Release both buttons. The LED for button A flashes and the digital display
shows the factory set value.
3. Press A until the display indicates the desired setting.
4. Press buttons B or C (up or down) to change the value of the setting.
5. Press Start button to save the setting.
To access the full Use and Care Manual visit:
Type in the Model Number which can be found inside the dishwasher door:
8
9
| General | Details |
|---|---|
| Name | BOSCH SHXM4AY55N Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.69 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher
BOSCH SMV4HTX27G Dishwasher
BOSCH SMV4HCX48E Dishwasher
Miele 12 698 330 Clean Touch Steel Dishwasher
FISHER and PAYKEL DD60STX6HI1 Dishwasher
Forte F24DWS650PR Dishwasher
MAYTAG ADB1200AWS Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher
BOSCH SPV4EKX20E Dishwasher
Electrolux A26298401 24 Dishwasher
BOSCH SMS4EKI06E-30 Dishwasher
BOSCH SME26EX00E Dishwasher
FISHER PAYKEL DW60FC1X114 Place Dishwasher