BOSCH SMS44DW01T Dishwasher

1

2

en  

Short and handy...  

Overview of water hardness settings  

Setting water softening system  

Programs  

... everything your dishwasher needs.  

You can find an overview of the  

The program data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the program and additional function  

selected.  

The runtime will change if the rinse  

aid system is switched off or rinse aid  

needs to be added.  

Medium  

Medium  

Medium  

Hard  

Hard  

Hard  

1.5 - 1.8  

1.9 - 2.1  

2.2 - 2.9  

3.0 - 3.7  

3.8 - 5.4  

5.5 - 8.9  

H02  

H03  

H04  

H05  

H06  

H07  

1.  

Press  

.

Before using for the first time, make sure you read both the op- water hardness values that can  

2. Hold programme button A and press  

repeatedly until the display  

shows H:xx.  

erating and the installation instructions.  

be selected here.  

A table of country-specific units  

can be found in the instruction  

manual.  

3. Release programme button A and  

.

a Programme button A flashes.  

4. Press programme button C re-  

peatedly until the right water hard-  

ness has been set.  

Hardness mmol/l  

range  

Setting  

value  

h.  

min.  

Soft  

Soft  

0 - 1.1  

1.2 - 1.4  

H00  

H01  

Program  

1) Duration [h:min]  

2) Energy [kWh]  

3) Water [l]  

5. Press  

to save the setting.  

1) 2:15  

2) 1,500  

3) 9,5  

/

Intensive 70°  

1) 4:55  

2) 0,836  

3) 9,5  

/

Adding special salt  

Eco 50°  

1) 1:00  

2) 1,300  

3) 11  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

/

Quick 65°  

1) 0:29 ¹  

2) 0,800  

3) 10  

/

Quick 45°  

1

half standard load  

4. Place the lid back on the dispenser and turn to  

close.  

Adding rinse aid  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

of the dispenser for rinse  

2

aid  

and lift  

.

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 ml  

25 ml  

15 ml  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 3 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMS44DW01T Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMS44DW01T Dishwasher Overview

Summary of Contents

• Page 1: Short and handy overview of water hardness settings. Setting the water softening system is essential for optimal performance. The program data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the program and additional function selected. The runtime will change if the rinse aid system is switched off or rinse aid needs to be added. To avoid damage to the appliance, only add special salt to the dispenser just before the program starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Load the tableware before starting the appliance. Only clean tableware that is suitable for dishwashers. To cancel the program, press for approximately 3 seconds.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and scoop out any water. Clean the filter elements under running water. Re-assemble the filter system and insert it into the appliance. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages. Insert the lower spray arm and the upper spray arm. Troubleshooting E:18 indicates the water supply hose is kinked. E:22 indicates filters are soiled or blocked. E:25 indicates the wastewater pump is blocked. Rust spots on cutlery may occur if cutlery is not sufficiently rust-resistant. Detergent residue may be present if spray arms were blocked.