DAEWOO DA1E6FW0ES Dishwasher
WARNING: Use the new water inlet
hose supplied with your machine, do not
use an old machine’s hose.
2. INSTALLATION
2.1. Machine positioning
WARNING: Run water through the
new hose before connecting.
When positioning the machine, place it in
an area where dishes can be easily loaded
and unloaded. Do not put the machine in an
area where the ambient temperature falls
below 0°C.
Read all warnings located on the packaging
before removing the packaging and
positioning the machine.
Place the machine close to a water tap
and drain. Take into consideration that the
connections will not be altered once the
machine is in position.
Do not hold the machine by its door or
panel.
WARNING: Connect the hose
directly to the water inlet tap. The pressure
supplied by the tap should be a minimum
of 0.03 MPa and a maximum of 1 MPa. If
the pressure exceeds 1 MPa, a pressure
relief valve must be fitted between the
connection.
WARNING: After the connections are
made, turn the tap on fully and check
for water leaks. Always turn off the
water inlet tap after a wash program has
finished.
Leave an adequate distance around the
machine to allow ease of movement when
cleaning.
Ensure the water inlet and outlet
hoses are not squeezed or trapped
and that the machine does not stand
on the electrical cable while positioning.
Adjust the feet so the machine is level and
balanced. The machine should be placed
on flat ground otherwise it will be unstable
and the door of the machine will not close
properly.
An Aquastop water spout is available
with some models. Do not damage it
or allow it to become kinked or
twisted.
2.4. Drain Hose
2.2. Water connection
We recommend fitting a filter to your water
inlet supply in order to prevent damage to
your machine due to contamination (sand,
rust, etc.) from indoor plumbing. This will
also help prevent yellowing and deposit
formation after washing.
Note printing on the water inlet hose!
If models are marked with 25°, the water
temperature may be max. 25 °C (cold
water).
For all other models:
Cold water preferred; hot water max.
temperature 60 °C.
Connect the water drain hose directly to
water drain hole or to the sink outlet spigot.
This connection should be minimum 50
cm and maximum 110 cm from floor that
dishwasher is placed.
2.3. Water inlet hose
IMPORTANT: Items will not wash
properly if a drain hose longer than 4
m is used.
EN - 6
| General | Details |
|---|---|
| Name | DAEWOO DA1E6FW0ES Dishwasher |
| Make | Daewoo |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.95 MB |
(1 votes, average: 5.00 out of 5)
Loading...
DAEWOO DA1D5SI0ES Dishwasher
FISHER PAYKEL DD24DTI9N Integrated Double Dishwasher
Hotpoint HFC 3C26 WC Dishwasher
beko DDS25842X Dishwasher
BOSCH SMV2HVX02E-01 Dishwasher
KKT KOLBE DW616FS Dishwasher
FISHER PAYKEL DW60UNT4B2 Built-Under Dishwasher
BOSCH SMV26DX00T Dishwasher
Whirlpool W7I HT58 T Fully Integrated Dishwasher
BOSCH SMS4ETI02E-01 Dishwasher
FISHER AND PAYKEL DD60SAX9 Dishwasher