Danby DDW18D1EW Dishwasher
OPERATING INSTRUCTIONS
DETERGENT DISPENSER
RINSE AID DISPENSER
The detergent dispenser must be filled before the
start of each wash cycle. Add the detergent just
Rinse aid can be used to prevent water droplets or
streaks from forming on dishes. The rinse aid will be
before starting the wash cycle. Adding the detergent released automatically during the final rinse. This
to the appliance too soon can cause it to become
damp and it may not dissolve properly.
dishwasher is designed to use liquid rinse aid only.
Do not use a powdered rinse aid as it will clog the
reservoir opening. Do not put any other substance
in the rinse aid dispenser as this can damage the
dishwasher.
Push the latch to open the dispenser.
Add the recommended amount of detergent to the
main detergent component. The detergent dispenser The rinse aid indicator light on the control panel will
has lines on the inside to indicate amounts of
detergent.
illuminate when the rinse aid dispenser is empty.
Fill the dispenser and ensure the lid is closed before
closing the door.
If dishes are heavily soiled, extra detergent can be
added to the main cabinet as necessary. Do not use
too much detergent as this can leave a residue on
dishes.
Do not put detergent in the rinse aid dispenser as
this can damage the rinse aid dispenser and leave a
soap film on dishes.
Ensure the detergent dispenser is closed before
closing the door.
The detergent dispenser will always be open and
empty at the end of a wash program.
Detergent tablets may not fully dissolve during a
short program. Only use detergent tablets with
longer programs to avoid residue on tableware.
Always follow the instructions included with the
detergent for best results.
To change how much rinse aid is being dispensed
with every wash, follow the steps below.
1. Turn the dishwasher off.
2. Press and hold the program button.
3. Turn the dishwasher on while still holding the
program button until “rA”appears on the
display.
4. The display will show the current level based on
the chart below. The factory default level is r4.
Press the program button to choose the desired
level.
5. Turn off the dishwasher to confirm the setting.
Note: If the dishes are
Level Dose
not drying properly or
are spotted, increase the
level.
r1
r2
r3
r4
r5
no rinse aid
1 dose
2 doses
3 doses
4 doses
If there are blue stains on
the dishes, decrease the
level.
5
| General | Details |
|---|---|
| Name | Danby DDW18D1EW Dishwasher |
| Make | Danby |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.8 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Danby DDW621WDB Dishwasher
Danby DDW1832ESS 18 Inch Dishwasher
MEIKO UPster U 400 M2 Glass and Dishwasher
BOSCH SMV8ZDX86M Dishwasher
BOSCH SMV4HTX33E Dishwasher
FISHER PAYKEL DW60FC2B2 Dishwasher
SIEMENS SN23EI14AE Dishwasher 60 cm A+++
Hotpoint 869991662940 Dishwasher
IKEA SBE8596Z0E DISKAD PROFFSIG Dishwasher
Miele 11836720-001-02 Dishwasher
BOSCH SPD4ELX01D Dishwasher
BOSCH SMS26DW00T Dishwasher