Home > Electrolux > Electrolux ESA12100SW Dishwasher
Electrolux ESA12100SW Dishwasher
ENGLISH
11
drying results are satisfactory while using
multi-tablets only, you can deactivate the
notification for refilling the rinse aid.
However, for best drying performance,
always use rinse aid.
All the consumption values
mentioned in this section are
determined in line with the
currently applicable standard
in laboratory conditions with
water hardness 2.5mmol/L
(water softener: level 3)
according to the regulation:
2019/2022 .
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
The pressure and the
temperature of water as well
as the variations of the
mains supply can change
the values.
How to deactivate the rinse aid
empty notification
The appliance must be in programme
selection mode.
How to set the water softener
level
The appliance must be in programme
selection mode.
Make sure that the programme marker
on the knob is set to the on/off position.
1. To enter the user mode, press and
hold
. At the same time turn the
knob counterclockwise until the
Make sure that the programme marker
on the knob is in the on/off position.
programme marker indicates the first
programme. Release
when the
1. To enter the user mode, press and
indicators
flashing.
and on/off start
hold
. At the same time turn the
knob counterclockwise until the
2. Turn the knob counterclockwise until
the programme marker indicates the
second programme.
programme marker indicates the first
programme. Release the
when
the indicators
flashing.
and on/off start
The indicator
setting:
shows the current
The intermittent flashing of
shows
•
is on = the rinse aid empty
notification is activated.
is off = the rinse aid empty
notification is deactivated.
the current setting, e.g. 5 flashes +
pause + 5 flashes = level 5.
•
2. Press
repeatedly to change the
setting. Each pressing of
3. Press
to change the setting.
increases the level number. After
reaching level 10, the count starts
again from level 1.
4. To confirm the setting, keep turning
the programme knob until the
programme marker is back in the
on/off position.
3. To confirm the setting, turn the
programme knob until the
programme marker is again in the
on/off position
6.4 The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 8 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 5.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the final
rinse.
When the rinse aid chamber is empty,
the rinse aid indicator turns on. If the
| General | Details |
|---|---|
| Name | Electrolux ESA12100SW Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.93 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
FISHER AND PAYKEL DW60UN2B2 5 Contemporary Built Under Dishwasher
BOSCH SMS4HMW00G Dishwasher
IKEA 304.754.26 LAGAN Integrated Dishwasher
BOSCH SMS4EMW01E Dishwasher
maidaid halcyon AMH91 Pass Through Gravity Drain Dishwasher
Electrolux GA60SLICCN Dishwasher
FISHER PAYKEL DD24SCTX9N Sanitize Dishwasher
FISHER and PAYKEL DD60DI9 Integrated Dishwasher
FISHER and PAYKEL DD24DCHTX9 N Contemporary Tall Dishwasher
KitchenAid KDFE204KPS Dishwasher