Home > Electrolux > Electrolux ESL63010 Dishwasher
Electrolux ESL63010 Dishwasher
14 electrolux
Frost precautions
If not possible, empty the appliance and
close the door. Disconnect the water inlet
hose and remove water from the water inlet
hose.
Caution! Do not install the appliance
where the temperature is below 0 °C.
The manufacturer is not responsible for
damage because of frost.
What to do if…
The appliance does not start or stops during
operation.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact the
Service Force Centre.
Caution! Switch off the appliance
before you do the below suggested
corrective actions.
Fault code and malfunction
Possible cause and solution
• continuous flash of the light of the • The water tap is blocked or furred with limescale.
running programme
• intermittent audible signal
• 1 flash of the end indicator light
Clean the water tap.
• The water tap is closed.
Open the water tap.
The appliance does not fill with water • The filter in the water inlet hose is blocked.
.
Clean the filter.
• The connection of the water inlet hose is not correct. The
hose can be kinked or squashed.
Make sure that the connection is correct.
• continuous flash of the light of the • There is a blockage in the sink spigot.
running programme
Clean the sink spigot.
• intermittent audible signal
• 2 flashes of the end indicator light
The appliance will not drain the wa-
ter.
• The connection of the water drain hose is not correct. The
hose can be kinked or squashed.
Make sure that the connection is correct.
• continuous flash of the light of the • Close the water tap and contact your local Service Force
running programme
Centre.
• intermittent audible signal
• 3 flashes of the end indicator light
Anti-flood device operates
The programme does not start
• The appliance door is not closed.
Close the door.
• Mains plug is not connected in.
Put in the mains.
• The fuse has blown out in the household fuse box.
Replace the fuse.
• Delay start is set.
Cancel the delay start to start the programme immediately.
After the check, switch on the appliance. The • Product number (PNC)
programme continues from the point of in-
terruption. If the malfunction shows again,
contact your Service Force Centre.
• Serial number (S.N.)
For these data, refer to the rating plate.
Write the necessary data here:
These data are necessary to help you quickly Model description : ..........
and correctly:
• Model (Mod.)
Product number : ..........
Serial number : ..........
| General | Details |
|---|---|
| Name | Electrolux ESL63010 Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.72 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
FRIGIDAIRE PDSH4816AF Dishwasher
KitchenAid KDFE104K Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
JENNAIR W11745540A Dishwasher
FORZA FD24DI Dishwasher
FISHER AND PAYKEL DW24UT4I2 Tall Dishwasher
FISHER PAYKEL DD24DTX6PX1 Sanitize Dishwasher
WISBERG WBDW40CW Dishwasher
Bosch SMU4HTW02H-01 Dishwasher
AEG FFE83800PM Built-Under Dishwasher