Home > Electrolux > Electrolux ESZ69300SX UltimateCare 700 Dishwasher
Electrolux ESZ69300SX UltimateCare 700 Dishwasher
22
Problem and alarm code Possible cause and solution
You cannot activate the
appliance.
•
•
Make sure that the mains plug is connected to the
mains socket.
Make sure that there is no damaged fuse in the fuse
box.
The programme does not
start.
•
•
•
Make sure that the appliance door is closed.
Press the start button.
If the delay start is set, cancel the setting or wait for
the end of the countdown.
•
The appliance recharges the resin inside the water
softener. The duration of the procedure is approxi‐
mately 5 minutes.
The appliance does not fill
with water.
The display shows i10 or
i11.
•
•
Make sure that the water tap is open.
Make sure that the pressure of the water supply is
not too low. For this information, contact your local
water authority.
•
•
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clog‐
ged.
•
Make sure that the inlet hose has no kinks or bends.
The appliance does not
drain the water.
The display shows i20.
•
•
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clog‐
ged.
•
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on. • Close the water tap.
The display shows i30.
•
•
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in
the user manual.
The appliance stops and
starts more times during
operation.
•
It is normal. It provides optimal cleaning results and
energy savings.
The programme lasts too
long.
•
•
If the delay start option is set, cancel the delay set‐
ting or wait for the end of the countdown.
Activating options can increase the programme dura‐
tion.
The displayed programme
duration is different than
the duration in the con‐
sumption values table.
•
The pressure and the temperature of the water, the
variations of the mains supply, the options, the quan‐
tity of dishes and the degree of soil can change the
programme duration.
The remaining time in the
display increases and
skips nearly to the end of
the programme duration.
•
This is not a defect. The appliance is working cor‐
rectly.
Small leak from the appli‐
ance door.
•
•
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
| General | Details |
|---|---|
| Name | Electrolux ESZ69300SX UltimateCare 700 Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.12 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
saco DIF 04B1 Merlin House Dishwasher
rhima RU-40 Underbench Dishwasher
FISHER PAYKEL DD60ST4HNB9 Built Under Dishwasher
beko 943711 Dishwasher
SHARP QW-NA25GU44BS-DE Undercounter Dishwasher
BOSCH SPI6EMS17E Dishwasher
Hotpoint H7F HS51 Dishwasher
FISHER AND PAYKEL DW24UT4I2 Dishwasher
SAMSUNG DW80CG40 Series Dishwasher
CMA DISHMACHINES CMA-180UC Under Counter Dishwasher