Home > Electrolux > Electrolux KECA7400W Builtin Dishwasher
Electrolux KECA7400W Builtin Dishwasher
13. TROUBLESHOOTING
Refer to the below table for information on
possible problems.
WARNING!
Improper repair of the appliance may
pose a danger to the safety of the user.
Any repairs must be performed by
qualified personnel.
With some problems, the display shows an
alarm code.
The majority of problems that may occur
can be solved without the need to contact
an Authorised Service Centre.
Problem and alarm code
Possible cause and solution
You cannot activate the appliance.
•
•
Make sure that the mains plug is connected to the mains socket.
Make sure that there is no damaged fuse in the fuse box.
The programme does not start.
•
•
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end of the
countdown.
•
The appliance recharges the resin inside the water softener. The dura‐
tion of the procedure is approximately 5 minutes.
The appliance does not fill with wa‐
ter.
•
•
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For this
information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The display shows
, Error i10 or
Error i11 and No intake of water.
•
•
•
The appliance does not drain the
water.
•
•
•
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
The display shows
, Error i20
and Water is not draining.
The anti-flood device is on.
•
Close the water tap and contact an Authorised Service Centre.
The display shows
, Error i30
and Risk of flood detected.
Malfunction of the water level detec‐
tion sensor.
The display shows i41 - i44.
•
•
Make sure that the filters are clean.
Switch the appliance off and on.
Malfunction of the wash pump or the
•
Switch the appliance off and on.
drain pump.
The display shows i51 - i59 or i5A -
i5F.
The temperature of the water inside
the appliance is too high or malfunc‐
tion of the temperature sensor oc‐
curred.
•
•
Make sure that the temperature of the inlet water does not exceed
60°C.
Switch the appliance off and on.
The display shows i61 or i69.
ENGLISH 29
| General | Details |
|---|---|
| Name | Electrolux KECA7400W Builtin Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.16 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Electrolux EEA27200L Dishwasher
SIEMENS SN65HX01VI Dishwasher
FISHER PAYKEL DD60DCX9 Double Dishwasher
BOSCH SMS26AW08G Dishwasher
beko BDFS26046XQ Dishwasher
BOSCH SHP88PZ55N Dishwasher
BOSCH SMS4IKW51T Dishwasher
BOSCH S189YCX02E Dishwasher
Kenmore 665.15824000 Undercounter Dishwasher
Miele PFD 407 Built Under Fresh Water Dishwasher
Oras 2605F Kitchen Faucet With Dishwasher