Haier HDW15V2 Dishwasher
Installation
DrainWater Connection
Fix the water drain hose properly to
the piping.The hose has to reach at one
point a height between 400 and 850 mm
above the appliance bottom line!
An extension hose for the water drain
hose must not exceed a total length of
4 m and must have the same diameter as
the water drain hose.
Following connections are possible:
Drain hose to sink
Hang the drain hose with the
U-support over the edge of a sink
with adequate size.
▶
▶
against slipping.
Drain hose to waste water
connection
▶
▶
The internal diameter of the stand
pipe with vent-hole must be minimum
40 mm.
Put the drain hose for approx 80 mm
.
in the wastewater pipe.
▶ Attach the U-support and secure it
Drain hose to sink connection
When connecting the drain hose to a
▶
sink trap with a drain hose spigot, make
sure that the drain hose is supported
to the height of the bench.
▶
Ensure the drain spigot has a minimum
hole diameter of 15 mm and it has been
drilled out.
CAUTION!
Ensure always that all connections (power supply, drain and fresh
)
water hose are firm, dry and leak free!
Take care these parts are never to be crushed, kinked, or twisted
If the supply cord is damaged, it must be replaced by the service
agent (see warranty card) in order to avoid a hazard.
33
| General | Details |
|---|---|
| Name | Haier HDW15V2 Dishwasher |
| Make | Haier |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.82 MB |

Haier HDW13V1S1 Dishwasher

Haier HDW15V3S1 Satina Dishwasher

Haier HDW10F1S1 300 Series Compact Dishwasher

Haier HDW15V2B2 Dishwasher

Haier HDW13G1W Dishwasher

Haier HDW15V2S1 Dishwasher

Haier HDW13G1X Dishwasher

Haier HDW10F1S1 Compact Dishwasher

Haier HDW13F0W1 Hygiene Dishwasher

Haier HDW13F0B1 Dishwasher



















































