Hisense HSCE14FS Dishwasher
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to
a threaded 3/4 inch connector and
make sure that it is fastened tightly in
place.
If the water pipes are new or have not
been used for an extended period of
time, let the water run to make sure
that the water is clear. This precaution
is needed to avoid the risk of the
water inlet to be blocked and damage
the appliance.
ordinary supply hose
safety supply hose
About the safety supply hose
The safety supply hose consists of the double walls. The hose's system guarantees its
intervention by blocking the flow of water in case of the supply hose breaking and
when the air space between the supply hose itself and the outer corrugated hose is
full of water.
WARNING
A hose that attaches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has one, it is recommended that
the hose be disconnected and the hole plugged.
How to connect the safety supply hose
1. Pull The safety supply hoses completely out from storage compartment located at
rear of dishwasher.
2. Tighter the screws of the safety supply hose to the faucet with thread 3/4 inch.
3. Turn water fully on before starting the dishwasher.
How to disconnect the safety supply hose
1. Turn off the water.
2. Unscrew the safety supply hose from the faucet.
16
| General | Details |
|---|---|
| Name | Hisense HSCE14FS Dishwasher |
| Make | Hisense |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.25 MB |

Hisense HFI663BXXL Dishwasher

Hisense HS673A60X Dishwasher

Hisense HV642C65UK Dishwasher

Hisense HV642E90UK Fully Dishwasher

Hisense HV643D90UK Dishwasher

Hisense HV642C60 Dishwasher

Hisense HV693C60UK Dishwasher

Hisense HS693C60XAD Dishwasher

Hisense HS622E90BUK Dishwasher

Hisense HS643D60WUK Dishwasher

































































