HOBART AM16 Commercial Dishwasher
|
AM16 WAREWASHER Daily Operation & Cleaning Guide
OPERATIONAL TIPS –
DAILY
SCAN TO
SCAN TO WATCH
INSTRUCTIONAL
VIDEO
GET THE MOST OUT OF
WATCH DAILY
CLEANING VIDEO
DAILY CLEANING
YOUR DISHWASHER
OPERATION
hobartcorp.com/am16training
hobartcorp.com/am16training
PRE-SCRAP DISHES
Spray down the inside of the machine and scrub
any hard-to-reach spots with a clean, damp cloth.
Remove rack track, strainer, scrap basket and
ASR basket* to clean and rinse.
Make sure the upper and lower wash and
rinse arms rotate freely and are clear of
Place strainer and scrap basket into the
1
2
3
4
1
2
dishwasher. Make sure to line up arrows.
USE COMMERCIAL
Close the door. Push POWER button.
DISHMACHINE
CHEMICALS ONLY
When fill is complete, the
readout will display READY.
3
Do not use any other chemicals
any obstructions.
with the dishmachine. Use PPE
Re-assemble the machine.
for handling.
Select the WASH CYCLE: 1, 2, 4, 6 minutes.
4
a. Replace strainer and scrap basket,
b. Install wash and rinse arms (if removed)
c. Replace rack track
To load a dishrack, open the door
DELIME THE MACHINE
The unit will alert you
and slide the rack in the machine.
when deliming is required.
When prompted, follow the
instructions on the display.
Note: Delime instructions will vary
based on model. Scan QR code for
more information.
Close the door, the machine will start
Wash/Rinse arm
d. Replace ASR basket if necessary
5
automatically. The PLAY button turns
Close the door. Hold the POWER button for
5 seconds to shut down. Power button will
turn half green and lights will turn off when
machine is fully drained.
After machine is drained, open hood and clean
inside of the machine with a damp cloth.
If there is water remaining in the tank, drain
remaining water by holding down the DRAIN
button for 3 seconds while the machine is off.
blue, and a progress bar will appear
at the bottom of the screen.
5
Once the screen shows a check mark
6
and reads CYCLE COMPLETED, the
6
7
dishrack may be removed.
Rack track
SCAN TO WATCH
DELIME VIDEO
To power off machine and drain, hold the
POWER button down for 5 seconds.
7
After cleaning, wipe down
Wash/Rinse arm
*Scrap baskets
8
machine exterior with a damp
Wash Cycle
cloth. Open machine door.
PROPER RACKING
Wash
Scrap
basket
WILL PROVIDE THE BEST
CLEANING RESULTS.
Blue Bold Text = Clean Daily
ASR/ADV
Base
REPLACING CHEMICALS
1. When the machine is out of
SANITIZER or DETERGENT
an alarm will sound & the
machine will automatically
pause operation. SANITIZER
EMPTY or DETERGENT EMPTY
and an ICON display on the machine control screen.
2. Replace the sanitizer or detergent. NOTE: Use only
commercial detergents & sanitizers with the AM16.
3. Chemical pumps will prime automatically once the
ENTER button is pressed.
ASR basket
Rinse
Strainer
Condense
(Ventless)
Wash tank
Stand
pipe
Complete
DO NOT
OVERLOAD RACK
© 2021 Hobart
701 S. Ridge Avenue, Troy, OH 45373
|
Phone: (888) 378-1338
|
hobartcorp.com
|
Resource Center: hobartcorp.com/am16training
F48539 (09/21)
| General | Details |
|---|---|
| Name | HOBART AM16 Commercial Dishwasher |
| Make | HOBART |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.16 MB |

HOBART S.48820 Commercial Dishwasher

HOBART CLCS66e ML Series Dishwasher

HOBART AM16 Commercial Dishwasher Overview
Summary of Contents
- Page 1: AM16 warewasher daily operation & cleaning guide Operational tips for daily use Pre-scrap dishes before washing Spray down the inside of the machine and scrub hard-to-reach spots Remove and clean rack track, strainer, scrap basket, and ASR basket Ensure wash and rinse arms rotate freely and are clear of obstructions Use commercial dishmachine chemicals only Select the wash cycle duration Delime the machine when prompted by the unit Proper racking will provide the best cleaning results Replace sanitizer or detergent when the machine indicates they are empty














