kleenmaid DW6032 Dishwasher
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to
a threaded 3/4 (inch) connector and
make sure that it is fastened tightly in
place.
If the water pipes are new or have not
been used for an extended period of
time, let the water run to make sure
that the water is clear. This precaution
is needed to avoid the risk of the
water inlet becoming blocked and
damaging the appliance.
safety supply hose
About the safety supply hose
The safety supply hose has double walls. The hose's system guarantees to block
the flow of water in case of the supply hose breaking and when the air space
between the supply hose itself and the outer corrugated hose is full of water.
NOTE: Supply hose length is 1.97m.
WARNING
A hose that attaches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has one, it is recommended that
the hose be disconnected and the hole plugged.
How to connect the safety supply hose
1. Pull the safety supply hose completely out from storage compartment located at
rear of dishwasher.
2. Tightly screw the safety supply hose to a tap with 3/4 inch thread.
3. Turn water fully on before starting the dishwasher.
How to disconnect the safety supply hose
1. Turn off the water.
2. Unscrew the safety supply hose from the tap.
16
| General | Details |
|---|---|
| Name | kleenmaid DW6032 Dishwasher |
| Make | kleenmaid |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.3 MB |

kleenmaid DW6020XB Black /Built Under Dishwasher

Kleenmaid DW6020XB Black Built Under Dishwasher

KLEENmaid DW6031 Dishwasher

KLEENmaid DW4531 45cm Dishwasher

kleenmaid DW6020X Dishwasher

kleenmaid DW6032 Semi Integrated Dishwasher





























































