Oursson DW4001TD Dishwasher
POSSiBLE PROBLEmS AnD SOLUTiOnS
Possible Problem
Possible Cause
Solutions
Device doesn’t turn on
1. The power cable is not connected to the
network.
2. There is no voltage in the power supply
network.
1. Verify that the power cable is plugged in.
2. Disconnect the device from the power
supply and wait for the voltage to normal-
ize.
3. Low water pressure.
4. The device’s door is not closed properly.
3. Check the connection to the water supply
with the appropriate parameters. Make
sure that the water supply is open.
4. Close the door firmly until it clicks.
Water does not drain from 1. The filter is clogged.
1. Clean the filter.
the dishwasher
2. The program is not finished yet.
3. The drain hose is kinked.
2. Wait for the program to complete.
3. Check the drain hose.
Noise
1. The sprayer touches the dishes in the
basket.
2. Dishes are not firmly placed in the basket.
1. Stop the program and set the dishes so
that they do not interfere with the opera-
tion of the sprayer.
2. Stop the program and set the dishes
correctly.
Foam in the dishwashing
chamber
Wrong detergent
Use only special detergents. If foam devel-
ops, stop the program, open the dishwasher,
wait until the foam settles. Close the door
and start the rinse program.
The dishes have not dried 1. Water is collected in the recesses of the
1. Follow the recommendations for the
proper placement of the dishes. Cups,
plates, etc. position upside down.
2. Wait until the program ends.
dishes.
2. Dishes removed too early, drying process
not completed.
Plastic dishes did not dry
Poor washing quality
The properties of plastic
The properties of plastic.
dishes have low heat-accumulating proper-
ties and dry slower.
Plastic
1. Utensils are placed incorrectly or too
many of it.
1. Follow the recommendations for the
proper placement of the utensils. Do not
overload the dishwasher.
2. Select a more intensive wash program.
3. Use more detergent or replace it with
another one.
4. Place the dishes in such a way so that it
does not interfere with the movement of
the sprayer.
2. Incorrectly selected program.
3. Not enough detergent.
4. The sprayer is blocked.
5. The detergent remains in the compart-
ment. The compartment is blocked by
utensils.
5. Correctly place the dishes.
ERROR CODE (DW4001TD)
Error code
Meaning
Possible reason
E2
Lack of water or too long filling time.
•
•
Water hose incorrectly connected, kinked, pinch.
There is no water flow (the water tap is not open;
insufficient water pressure in the house).
E4
E5
E7
No heating to set temperature
Water overflow/leakage
Not enough water
Malfunction of heating element or sensor
Water is leaking
Water is leaking, the pump stops working, the micros-
witch is turned off.
E10
High water level
The volume of water flow exceeds the set value.
12
| General | Details |
|---|---|
| Name | Oursson DW4001TD Dishwasher |
| Make | oursson |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.51 MB |
(1 votes, average: 5.00 out of 5)
Loading...
IKEA 9001774317 TORSBODA Dishwasher
Midea WQP4-2605 Tabletop Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
BOSCH SMS2HKI03E-30 Dishwasher
ASKO DBI343ID.W.AU Dishwasher
FISHER and PAYKEL DW60UN4B2 Contemporary Built Under Dishwasher
Midea MDF18A1A Series Dishwasher
FISHER PAYKEL DD24SCTW9 N Dishwasher
gorenje 642D65 Dishwasher
NEFF S153HTX02G Dishwasher