Oursson DW4001TD Dishwasher
2. With increased water pressure, install a pressure
reducing valve at the inlet.
INSTALLATION AND CONNECTION, Pic. B
•
Unpack the device and remove all packaging
material.
3. Connect the cold water supply hose to a ¾ ”threaded
line and make sure the connection is tight. Do not
use too much force so as not to damage the threads.
•
Check for accessories. The presence of water stains
and water stains inside the device is normal.
Retain the original packaging.
Inspect the device for defects and deformations.
It is recommended to install the device in the vicinity
of an existing water supply tap, drainage holes for
water.
Note:
•
•
•
•
If the water pipes are new or have not been used for
a long period of time, let the water drain to make sure
that the water is clean and free from contamination.
Otherwise, there is a risk that the water intake may
become blocked and the device may be damaged.
Turn off the water supply if you are not using a
dishwasher.
•
•
Сonnect the device only to the cold water main.
Install the appliance on a horizontal level, heat-
resistant surface, keeping the distance from the walls/
furniture, providing sufficient space for ventilation of
the device and free opening of the door, Pic. B-1.
This device must not be built-in. Pic. A. Make sure
that the device does not slip on the surface.
It is not recommended to set the device on the floor,
Pic. B-1.
Blocking the ventilation holes can damage the
device. Ventilation holes in the bottom (if provided by
the design) must not be covered by carpet.
Install the device so that access to the outlet is free.
Do not cover the device or place objects on top of it.
•
After connecting the drain hose and the
water supply hose, plug in the device. Make
sure that there are no leaks anywhere after
the first wash cycle, Pic. B-5 .
•
•
PRODUCT SET, Рiс. C
Dishwasher...........................................................1 pc.
Hose for water supply ..........................................1 pc.
Drain hose ...........................................................1 pc.
Cutlery basket ......................................................1 pc.
Basket for dishes .................................................1 pc.
Instruction manual ...............................................1 pc.
Warranty card ......................................................1 pc.
•
•
•
The device must be connected to the water
supply only with the help of new sets of
hoses; old hoses should not be reused.
•
Connect the device to
grounded, Pic. A. Do not remove the grounding from
the electrical connection cable.
a
power outlet that is
ELEMENTS OF DESIGN, Рiс. D
Basket for dishes
Detergent drawer
Control Panel
Vent
Sprayer
Door
Water pressure:
•
•
•
Minimum 0.03 MPa (0.3 bar)
Maximum 0.6 MPa (6 bar)
At higher water pressures: install a pressure reducing
valve at the inlet.
Drain hole
Water inlet hose
Power cable
•
Before first use, wipe the body of the device with a dry
and soft cloth.
UTILIZATION
Before connecting, make sure the device is
unplugged.
Control panel, Pic. D-3
– ON/OFF button
Drain hose connection
1. Place the «double wire clamp» on the drain hose, Pic.
B-3.
– Quick Wash program
– ECO program
2. Install the drain hose on the drain hole of the dishwasher
and secure it with the «double wire clamp». Please note
that the drain hose should not be twisted, pinched and
without loops, Pic. B-1.
– Intensive Wash program
3. Connect the other end of the drain hose to a sewer pipe
with a diameter of at least 40 mm or connect to a sink
siphon, Pic. B-2.
– Display
Display indications:
•
gram
Note: The free end of the drain hose should be at a
height of 400 to 1000 mm and should not be immersed
in water to avoid reverse water flow.
washing temperature, lights up after selecting a pro-
•
the time for the program cycle, lights up after select-
ing a program
If necessary, make a hole in the kitchen worktop to
organize the drain hose and connect it under the sink.
Note: After selecting a program, the temperature and
time indicators will be displayed alternately.
error codes
Connecting the water supply hose, Pic. B-4
•
1. Make sure that the water supply hose is not kinked.
8
| General | Details |
|---|---|
| Name | Oursson DW4001TD Dishwasher |
| Make | oursson |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.51 MB |
(1 votes, average: 5.00 out of 5)
Loading...
