whirlpool WFE 2B19 X Dishwasher

1

2

3

4

Quick Guide  

EN  

THANK YOU FOR BUYING A HOTPOINT PRODUCT.  

In order to receive a more complete assistance, please register  

your appliance on: www.hotpoint.eu/register  

PLEASE SCAN THE QR CODE ON YOUR  

APPLIANCE IN ORDER TO HAVE MORE  

DETAILED INFORMATION  

Before using the appliance carefully read Safety Instructions  

guide.  

CONTROL PANEL  

1. On-Off/Reset button with indicator light  

2. Program selection button with indicator light  

3. Half Load button with indicator light  

4. Rinse Aid refill indicator light  

5. Salt refill indicator light  

6. Program indicator lights  

7. Delay indicator light  

8. Delay button with indicator light  

9. Tablet (Tab) button with indicator light  

10. Start/Pause button with indicator light / Drain out  

1

2

3

4

5

6

7

8

9

10  

FIRST TIME USE  

FILLING THE SALT RESERVOIR  

FILLING THE DETERGENT DISPENSER  

The use of salt prevents the formation of LIMESCALE on the dishes and on To open the detergent dispenser use the opening device C. Introduce the  

the machine’s functional components.  

It is mandatory that the salt reservoir never be empty.  

It is important to set the water hardness.  

The salt reservoir is located in the lower part of the dishwasher and must be  

filled when the SALT REFILL indicator light in the control panel is lit.  

detergent into the dry dispenser D only. Place the amount of detergent for  

pre-washing directly inside the tub.  

The detergent dispenser automatically opens up at the right time  

according to the program.  

If all-in-one detergents are used, we recommend using the TABLET button,  

because it adjusts the program so that the best washing and drying results  

are always achieved Usage of detergent not designed for dishwashers  

may cause malfunction or damage to the appliance.  

•

•

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 1 kg); it is not unu-  

sual for a little water to leak out.  

WATER SOFTENING SYSTEM  

3. Only the first time you do this: fill the salt reservoir  

with water.  

Water softener automatically reduces water hardness, consequently pre-  

venting scale buildup on heater, contributing also to better cleaning effi-  

ciency. This system regenerates itself with salt, therefore it is required  

to refill salt container when empty.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into  

the container during the wash program (this could damage the water  

softener beyond repair).  

Whenever you need to add salt, it is mandatory to complete the proce-  

dure before the beginning of the washing cycle to avoid corrosion.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 6 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse  

aid dispenser A should be filled when the  

RINSE AID REFILL indicator light in the con-  

trol panel is lit.  

D

C

NEVER pour the rinse aid directly into the  

appliance tub.  

A

PROGRAMS TABLE  

Duration  

Water  

Energy  

Available  

options ^*)  

of wash  

program  

(h:min)^**)  

Program  

Programs description  

consumption consumption  

(litres/cycle)  

9.5  

(kWh/cycle)  

Eco 50°- Eco program is suitable to clean normally soiled table-  

ware, that for this use, it is the most efficient program in terms of  

its combined energy and water consumption, and that it is used  

to assess compliance with the EU Ecodesign legislation.  

1.  

3:35  

0.95  

Intensive 65° - Program recommended for heavily soiled croc-  

kery, especially suitable for pans and saucepans (not to be used  

for delicate items).  

2.  

3.  

4.  

5.  

2:40  

2:15  

0:28  

0:12  

18.0  

16.0  

9.0  

1.60  

1.40  

0.50  

0.01  

Mixed 55° - Mixed soil. For normally soiled dishes with dried food  

residues.  

Rapid 28’50°- Program to be used for half load of lightly-soiled  

dishes with no dried food residues. Does not include drying phase.  

-

-

Soak - Use to refresh crockery planned to be washed later. No  

detergent to be used with this program.  

4.7  

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.  

Note for Test Laboratories:  

For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com  

Pre-treatment of the dishes is not needed before any of the programs.  

*) Not all options can be used simultaneously.  

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and  

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-  

bration. The sensor calibration can increase program duration up to 20 min.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	whirlpool WFE 2B19 X Dishwasher
Make	Whirlpool
Language	English
Filetype	PDF (Download)
File size	1.48 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Whirlpool

whirlpool WFE 2B19 X Dishwasher Overview

Summary of Contents

• Page 1: Quick guide Thank you for buying a Hotpoint product. In order to receive more complete assistance, please register your appliance. Before using the appliance, carefully read the safety instructions guide. Control panel includes buttons for on-off/reset, program selection, half load, rinse aid refill, salt refill, program indicator lights, delay, tablet, and start/pause. Filling the salt reservoir is mandatory to prevent limescale formation. The salt reservoir must be filled when the salt refill indicator light is lit. Water softening system reduces water hardness and prevents scale buildup. Rinse aid makes dish drying easier and should be filled when the rinse aid refill indicator light is lit. The Eco program is suitable for normally soiled tableware and is the most efficient in terms of energy and water consumption. Pre-treatment of dishes is not needed before any of the programs.
• Page 2: Please scan the QR code on your product in order to have more detailed information. Options can be selected directly by pressing the corresponding button. If an option is not compatible with the selected program, the corresponding LED flashes rapidly 3 times and beeps will sound. The delay function allows you to delay the start time of the program by 2, 4, or 8 hours. The delay function cannot be set once a program cycle has been started. The drain out function can be used to stop and cancel the active cycle. A half load cycle may be used to save water, electricity, and detergent. The cutlery basket should be positioned only at the front of the lower rack. Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards. Cleaning the filter assembly and spray arms is essential for maintenance.
• Page 3: Page 3
• Page 4: Page 4