Home > AEG Electrolux > AEG Electrolux FFB73727PM Dishwasher

AEG Electrolux FFB73727PM Dishwasher

2
2
5. To install the spray arm (C) back,  
insert the mounting element (B) in  
the spray arm and fix it in the delivery  
tube (A) by turning it clockwise. Make  
sure that the mounting element locks  
into place.  
6. Install the cutlery drawer on the  
sliding rails and block the stoppers.  
12. TROUBLESHOOTING  
to contact an Authorised Service  
Centre.  
WARNING!  
Improper repair of the  
appliance may pose a  
danger to the safety of the  
user. Any repairs must be  
performed by qualified  
personnel.  
Refer to the below table for information  
on possible problems.  
With some problems, the display shows  
an alarm code.  
The majority of problems that may  
occur can be solved without the need  
Problem and alarm code  
Possible cause and solution  
You cannot activate the ap‐  
pliance.  
Make sure that the mains plug is connected to the mains  
socket.  
Make sure that there is no damaged fuse in the fuse  
box.  
The programme does not  
start.  
Make sure that the appliance door is closed.  
Press the start button.  
If the delay start is set, cancel the setting or wait for the  
end of the countdown.  
The appliance recharges the resin inside the water soft‐  
ener. The duration of the procedure is approximately 5  
minutes.  
The appliance does not fill  
with water.  
The display shows i10 or  
i11.  
Make sure that the water tap is open.  
Make sure that the pressure of the water supply is not  
too low. For this information, contact your local water  
authority.  
Make sure that the water tap is not clogged.  
Make sure that the filter in the inlet hose is not clogged.  
Make sure that the inlet hose has no kinks or bends.  
GeneralDetails
NameAEG Electrolux FFB73727PM Dishwasher
MakeAEG Electrolux
LanguageEnglish
FiletypePDF (Download)
File size0.95 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

AEG Electrolux FFB73727PM Dishwasher