AEG FSE74737P Quickselect Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

EN User Manual  

FSE74737P  

Dishwasher  

USER  

MANUAL  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	AEG FSE74737P Quickselect Dishwasher
Make	AEG
Language	English
Filetype	PDF (Download)
File size	0.98 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• AEG
• ALL DISHWASHER INSTRUCTIONS & USER MANUALS

AEG FSE74737P Quickselect Dishwasher Overview

Summary of Contents

• Page 1: User manual for the FSE74737P dishwasher.
• Page 2: SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result. PRODUCT DESCRIPTION CONTROL PANEL PROGRAMME SELECTION BASIC SETTINGS BEFORE FIRST USE DAILY USE HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING TECHNICAL INFORMATION ENVIRONMENTAL CONCERNS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler. Please spend a few minutes reading to get the very best from it.
• Page 3: Children and vulnerable people safety This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities if they have been given supervision or instruction. Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. Children should be supervised to ensure that they do not play with the appliance. Keep detergents away from children. Keep children and pets away from the appliance when the door is open. Children shall not carry out cleaning and user maintenance of the appliance without supervision. General safety This appliance is for cleaning household-type dishes and tableware only. This appliance is designed for single household domestic use in an indoor environment.
• Page 4: Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Do not drink and play with the water in the appliance. Do not remove the dishes from the appliance until the programme is complete. The appliance can release hot steam if you open the door while a programme operates. This appliance is fitted with a 13 A mains plug. Ensure that there are no visible water leaks during and after the first use of the appliance. To repair the appliance contact the Authorised Service Centre.
• Page 5: Aquastops, structural and interior conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. Some spare parts are only available to professional repairers, and not all spare parts are relevant for all models. The following spare parts will be available for 10 years after the model has been discontinued: door hinge and seals, other seals, spray arms, drain filters, interior racks and plastic peripherals such as baskets and lids. These lamps are intended to withstand extreme physical applications and are not suitable for household room illumination. Disconnect the appliance from the mains supply. Cut off the mains cable and discard it. Remove the door catch to prevent children and pets from getting closed in the appliance. Product description includes various components such as ceiling spray arm, upper spray arm, lower spray arm, filters, rating plate, salt container, air vent, rinse aid dispenser, detergent dispenser, lower basket, upper basket, and cutlery drawer.
• Page 6: The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp that comes on when you open the door or switch the appliance on while the door is open. The control panel includes an On/Off button, Delay Start button, Display, Extras buttons, and AUTO Sense program button. The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. The ECOMETER indicates the most environmentally friendly programme selection for a normally soiled dishwashing load. The rinse aid indicator is on when the rinse aid dispenser needs refilling. The salt indicator is on when the salt container needs refilling. The Machine Care indicator is on when the appliance needs internal cleaning with the Machine Care programme.
• Page 7: Drying phase indicator is on when a programme with the drying phase is selected. The appliance senses the degree of soil and the amount of dishes in the baskets. MY TIME selection bar allows selecting a suitable dishwashing cycle based on programme duration. You can adjust the programme selection to your needs by activating EXTRAS. ExtraSilent reduces the noise generated by the appliance, resulting in a longer programme duration. Quick is the shortest programme (30min) suitable for dishwashing a load with fresh and light soil. ExtraPower improves the dishwashing results by increasing the wash temperature and duration. 1h 30min is suitable for dishwashing and drying normally soiled items. ECO is the longest programme for efficient energy and water consumption for normally soiled crockery and cutlery. GlassCare prevents delicate loads from damaging by reducing rapid temperature changes during the dishwashing cycle.
• Page 8: Programmes overview Dishwasher programmes vary based on the degree of soil and type of load. Quick programme is designed for fresh crockery and cutlery with a 50 °C wash. The ECO programme is suitable for normal to heavy soiled items, operating at 60 °C. ExtraSilent programme operates at 50 °C for lightly soiled items, ensuring quiet operation. AUTO Sense adjusts the wash cycle based on the load, ranging from 50 to 60 °C. Machine care is essential for cleaning the appliance interior. Consumption values include water usage, energy consumption, and duration for each programme.
• Page 9: Programme values for water, energy, and duration are provided for various settings. The pressure, temperature, mains supply variations, options, quantity of dishes, and degree of soil can affect these values. Values for programmes other than ECO are indicative only. Basic settings can be configured according to user needs. Water hardness can be adjusted from level 1L to level 10L. Rinse aid level can be adjusted from level 0A to level 6A. The end sound can be activated or deactivated for programme completion. Auto door open feature can be activated or deactivated. Key tones can be turned on or off for button presses. The latest programme selection can be enabled or disabled for automatic selection of the most recently used programme.
• Page 10: Number setting allows you to activate or deactivate the TimeBeam. You can change the basic settings in setting mode. To enter setting mode, press and hold the designated buttons for about 3 seconds. When in setting mode, the bars of the ECOMETER represent available settings. You cannot enter setting mode while a programme is running. To change a setting, select the desired bar on the ECOMETER and press OK. The current setting value will flash, allowing you to change it using Previous or Next. Press OK to confirm the new setting, which will then be saved. The appliance returns to the basic settings list after saving. The water softener removes minerals from the water supply.
• Page 11: Water hardness can have a negative effect on washing results. Your local water authority can advise you on the hardness of the water in your area. Set the right level of the water softener to assure good washing results. The higher the content of minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener should be adjusted according to the hardness of the water in your area. Multi-tabs containing salt are not effective enough to soften hard water. For the correct water softener operation, the resin of the softener device needs to be regenerated regularly. This regeneration process is automatic and is part of the normal dishwasher operation. A new regeneration process will be initiated between the final rinse and the programme end after the prescribed quantity of water has been used.
• Page 12: In case of the high water softener setting, regeneration initiation has no impact on the cycle duration unless it occurs in the middle of a programme or at the end of a programme with a short drying phase. For best drying performance, always use rinse aid and keep the rinse aid indicator active. You can activate an acoustic signal that sounds when the programme is completed. The rinsing of the water softener lasts 5 minutes and increases total water consumption by additional 4 litres. Acoustic signals sound also when a malfunction of the appliance occurs and cannot be deactivated. AirDry improves the drying results by automatically opening the appliance door during the drying phase. Each performed softener rinse may prolong the programme duration by another 5 minutes. The rinse aid helps to dry the dishes without streaks and stains and is automatically released during the hot rinse phase. The rinse aid indicator notifies when the rinse aid chamber is empty. Do not try to close the appliance door within 2 minutes after automatic opening to avoid damage.
• Page 13: TimeBeam displays information on the floor below the appliance door. If children have access to the appliance, it is advised to deactivate AirDry due to potential danger from the automatic opening of the door. The programme duration is shown when the programme begins and displays CLEAN when completed. The countdown duration is displayed when the delay start begins. An alarm code appears when the appliance has a malfunction. The buttons on the control panel make a click sound when pressed, which can be deactivated. TimeBeam is off when AirDry opens the door; check the control panel display for remaining time. You can set the automatic selection of the most recently used programme and options. The latest programme is saved and selected automatically after activating the appliance. Make sure the current level of the water softener matches the hardness of the water supply before first use.
• Page 14: The salt container How to fill the rinse aid dispenser Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. Only use rinse aid designed specifically for dishwashers. Fill the rinse aid dispenser when the indicator is clear. Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. Make sure that the lid locks into position.
• Page 15: Daily use involves several steps for operating the appliance effectively. Open the water tap and check the maximum filling level for the dispenser. Press and hold to activate the appliance. Fill the salt container and rinse aid dispenser if they are empty. Load the baskets and add the detergent. To select and start a programme, slide your finger across the MY TIME selection bar. The ECOMETER indicates the level of energy and water consumption. Activate applicable EXTRAS if desired before starting the programme. Use detergent specifically designed for dishwashers. For detergent dosage, refer to the manufacturer's instructions on the packaging.
• Page 16: It is not possible to activate or deactivate options while a programme is running. If you cancel the delay start, you have to select the programme again. Not all options are compatible with each other. Opening the door while a programme is running pauses the wash cycle. The appliance senses the type of load and adjusts a suitable wash cycle. If you open the door during the delay start countdown, the countdown is paused. During the countdown, you cannot change the delay time and the programme selection. The Auto Off function saves energy by switching the appliance off when it is not operating. When the programme is completed, the appliance will switch off automatically. After 5 minutes if a programme was not started, the appliance will switch off.
• Page 17: The Auto Off function switches the appliance off automatically. When the programme is complete, the display shows 0:00. Follow the hints below to ensure optimal cleaning and drying results in daily use and to protect the environment. Washing dishes in the dishwasher as instructed in the user manual usually consumes less water and energy than washing dishes by hand. Load the dishwasher to its full capacity to save water and energy. Only use salt, rinse aid and detergent designed for dishwasher. Other products can cause damage to the appliance. Detergent tablets do not fully dissolve with short programmes. Always use the correct quantity of detergent. Insufficient dosage can result in poor cleaning results. Do not pre-rinse dishes by hand. It increases the water and energy consumption. Select a programme according to the type of load and the degree of soil. ECO offers the most efficient use of water and energy consumption.
• Page 18: Machine care is a programme designed to clean the appliance interior with optimal results. Check the filters and the sump after each use of the dishwasher. Foreign objects decrease the cleaning performance and can cause damage to the drain pump. When the appliance senses the need for cleaning, the indicator for the machine care programme is on. Use a descaler or a cleaning product designed specifically for dishwashers. Clean the appliance with a moist soft cloth. Only use neutral detergents and do not use abrasive products. The filter system is made of 3 parts. To maintain the performance of your appliance, use a cleaning product designed specifically for dishwashers at least once every two months. Wipe clean the door, including the rubber gasket, once a week.
• Page 19: Reassemble the filters (B) and (C). Put back the filter (B) in the flat filter (A). Remove the filter (C) out of filter (B). Wash the filters. An incorrect position of the filters can cause bad washing results and damage to the appliance. We recommend cleaning the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. Make sure that there are no residues of food or soil in or around the edge of the sump. Put back in place the flat filter (A). To remove the lower spray arm, pull it upwards.
• Page 20: To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. To install the spray arm back, press it downwards. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place. We recommend cleaning the upper spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. Pull out the upper basket.
• Page 21: Move the upper basket to the lowest level to reach the spray arm more easily. To detach the spray arm from the delivery tube, turn the mounting element counterclockwise and pull the spray arm downwards. Wash the spray arm under running water. Use a thin pointed tool to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside. We recommend cleaning the ceiling spray arm regularly to prevent soil from clogging the holes. The ceiling spray arm is placed on the ceiling of the appliance. To install the spray arm back, insert the mounting element in the spray arm and fix it in the delivery tube by turning it clockwise. Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel. Refer to the below table for information on possible problems.
• Page 22: Problem and alarm code You cannot activate the appliance. Make sure that the mains plug is connected to the mains socket. The programme does not start. Make sure that the appliance door is closed. The appliance does not fill with water. Make sure that the water tap is open. The appliance does not drain the water. Make sure that the sink spigot is not clogged. The anti-flood device is on. Close the water tap. Malfunction of the water level detection sensor. Make sure that the filters are clean.
• Page 23: Problem and alarm code Possible cause and solution The level of water inside the appliance is too high. Switch the appliance off and on. Make sure that the filters are clean. The appliance stops and starts more times during operation. It is normal. It provides optimal cleaning results and energy savings. The programme lasts too long. If the delay start option is set, cancel the delay setting or wait for the end of the countdown. The displayed programme duration is different than the duration in the consumption values table. Refer to the consumption values table in the chapter Programme selection. The appliance trips the circuit-beaker. The amperage is insufficient to supply simultaneously all the appliances in use.
• Page 24: The PNC can be found on the rating plate on the appliance door. You can also check the PNC on the control panel. If the problem occurs again, contact an Authorised Service Centre. For alarm codes not described in the table, contact an Authorised Service Centre. The display shows the PNC of your appliance. We do not recommend using the appliance until the problem has been completely fixed. If you contact an Authorised Service Centre, you need to provide the product number code of your appliance. Refer to Daily use, Hints and tips, and the basket loading leaflet for poor washing results. Activate the function AirDry to improve the drying performance. Always use rinse aid, even with multi-tablets.
• Page 25: Problem Possible cause and solution There are stains and dry water drops on glasses and dishes. The released quantity of rinse aid is not sufficient. Adjust the rinse aid dosage to a higher level. The quality of the rinse aid can be the cause. The interior of the appliance is wet. This is not a defect of the appliance. Humidity condenses on the appliance walls. Unusual foam during washing. Use the detergent designed specifically for dishwashers. Do not pre-rinse dishes under running water. Traces of rust on cutlery. There is too much salt in the water used for washing. Silver and stainless steel cutlery were placed together. There are residues of detergent in the dispenser at the end of the programme. The detergent tablet was stuck in the dispenser and was not washed away by water. Make sure that the spray arms are not blocked or clogged. Odours inside the appliance. Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the tableware, on the tub and on the inside of the door. The level of salt is low, check the refill indicator. Your tap water is hard. Dull, discoloured or chipped tableware. Make sure that only dishwasher-safe items are washed in the appliance. Activate the GlassCare option to ensure special care for glassware and delicate items.
• Page 26: Technical information includes dimensions, voltage, electrical connection, frequency, water supply pressure, and capacity. The dimensions are 596 mm width, 818-898 mm height, and 550 mm depth. The voltage range is 200-240 V, with a frequency of 50-60 Hz. Water supply pressure ranges from 0.5 to 10 bar and 0.05 to 1.0 MPa. The appliance has a capacity for 15 place settings. For energy efficiency, consider using hot water from alternative energy sources. The EU EPREL database can be accessed for more information on energy performance. A QR code on the energy label links to the EU EPREL database registration. Environmental concerns emphasize recycling and proper disposal of the appliance and its packaging.
• Page 27: Page 27