Home > Amica > Amica GSP 546 110 W Standing Dishwasher

Amica GSP 546 110 W Standing Dishwasher

3. Larger residues can be rinsed under running water. Clean the filter  
completely with a soft, clean brush.  
4. Install the filters in reverse order, place the filter insert and turn  
clockwise as indicated by the arrow.  
WARNING: Do not overtighten the filters. Carefully replace the filters  
and install in place. Otherwise, contaminants can enter the dishwasher’s  
systems and cause clogging.  
NEVER: use the dishwasher without the filter assembly. Incorrect filter  
replacement can reduce the appliance effectiveness and cause damage  
to the dishes and cutlery.  
Spray arms  
It is necessary to clean the spray arms regularly for hard water chemi-  
cals will clog the spray arm jets and bearings.  
To clean the spray arms, follow the instructions below:  
1. To remove the upper spray arm, hold the nut in the centre still and  
rotate the spray arm counter-clockwise to remove it.  
2. To remove the lower spray arm, pull out the spray arm upward.  
3. Wash the arms in soapy and warm water and use a soft brush to  
clean the jets. Replace them after rinsing them thoroughly.  
Clean the dishwasher  
Frost protection  
In winter, the dishwasher must be protected against freezing tempera-  
ture. After each wash:  
1. Disconnect the dishwasher from power.  
2. Turn off the water supply and disconnect the water inlet hose from the  
water valve.  
3. Drain the water from the inlet hose and the water valve. (Collect the  
water in a bowl)  
4. Reconnect the water inlet hose to the water valve.  
- 67 -  
GeneralDetails
NameAmica GSP 546 110 W Standing Dishwasher
MakeAmica
LanguageEnglish
FiletypePDF (Download)
File size2.74 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Amica EGSP 14797-1 E Dishwasher
Amica EGSP 14797-1 E Dishwasher

Amica GSP 546 110 W Standing Dishwasher